622 / 700c / 29er

Machine built. Hubs: Shimano Deore LX T660 Rims: Mavic A319 double-wall rims w/eyelets. Presta drilled. Spokes: 36 DT Competition Double-butted spokes front and rear. For commuting and light touring. Will accept any Shimano-type cassette made in the last 15 years, 7-speed, 8-speed, 9-speed or 10-speed. (7-speed requires an additional 4.5 mm spacer to fill in the gap.) Rear Hub is 135mm spacing Front hub is standard 100 mm spacing. QR Skewers included. Don't forget rim tape. Check the Related Items, below.

Shimano/Mavic 36 spoke Wheelset. Machine built. Will accept any Shimano-type cassette made in the last 15 years, 7-speed, 8-speed, 9-speed or 10-speed. (7-speed requires an additional 4.5 mm spacer to fill in the gap.) For commuting and light touring. Hubs: Shimano Tiagra 8/9/10-speed cassette type. Silver. Rims: Mavic A319. Silver. Presta drilled. Spokes: 36 DT Swiss 2.0/1.8mm Double-butted, stainless steel. Rear Hub Spacing: 130 mm Standard road. Recommended Tire Width: 28mm and up. QR Skewers included. Don't forget rim tape. Check the Related Items, below.

Quando sealed cartridge bearing Quick Release hubs, for traditional thread-on Freewheels. 36 DT 2.0 mm (14 g) Stainless Spokes. 622mm (700C) Sun CR-18 rims. Strong, general purpose rim. Drilled for presta valve tube. These wheelsets are excellent for upgrading older road bikes if you want to stick with the old-style freewheel. Rear hub spacing is 126 mm, will usually fit OK in 120 frames too. Note:These are quite good for being stock wheelsets with straight gauge spokes, and they will give good service for most riders/applications. Heavier riders and those carrying heavy loads, for instance touring cyclists, are likely to find they need higher quality custom-built wheels. 126 mm spacing, takes standard 5-, 6- or 7-speed freewheels.

Origin8/Mavic Open Elite (formerly Open Sport) Fixed Gear Rear Wheel 36 Spokes. Just the ticket for converting an older road bike to fixed gear. Rim - Mavic Open Elite, silver Hub - Origin8 (Formula), Fixed/Freewheel w/sealed cartridge bearings. 120mm spacing Spokes - 36 DT stainless steel For a typical installation you'll also need: •Fixed-Gear sprocket •Lockring •Fixed-Gear Short chainring bolts so you can remove the outer chainring. •Axle spacers to fit the hub to match the spacing of your frame. (The stock axle is long enough to space out to 130 mm).

We will re-space to 126 or 130mm for $6.00 upcharge. SEE RELATED ITEMS BELOW.

Machine built. Hubs: Shimano RS400 (FKA Tiagra) 8/9/10/11-speed** cassette type. Silver. Rims: Velocity Dyad. Silver. Spokes: 36 DT Swiss 2.0/1.8mm Double-butted, stainless steel. Rear Hub Spacing: 130 mm Standard road. Recommended Tire Width: 28mm and up. Recommended rim tape: 16mm width Will accept any Shimano-type cassette made in the last 15 years, 7-speed, 8-speed, 9-speed, 10-speed or 11-Speed. ** A thin spacer is included to install an 8 - 10 speed cassette. (7-speed requires an additional 4.5 mm spacer to fill in the gap.) QR Skewers included.

NOTE: Current hub is the DH-3D32 6-Bolt disc model Shimano Generator Front Wheel - Hub / 700C Rim. Built strong. 36 DT Swiss double butted spokes, chromed brass nipples. Sun CR-18 Rim. Presta drilling. Silver only. 700C only. You'll need 1 roll of rim tape. Not included. See below. Ready for your tube and tire.

Fixie boy is getting older! He wants some gears. This is just the ticket. Shimano Nexus 3 Speed internal gear hub with coaster brake (back pedal operated), laced into Sun CR18 rim (Presta drilled) 36 DT stainless steel spokes. Comes with complete parts kit, 19t sprocket and a set of non-turn washers (yellow/brown). Nexus twist shifter included! Note: Shifter fits 22.2mm flat and upright handlebars. Silver hub. Satin finished silver rim The Nexus hub has 120mm spacing (same as most track frames). Overall axle length: 168mm Don't forget rim tape. Check the Related Items, below.

Don't need no stinkin' coaster brake? Riders have been asking for a 700c 3-speed wheel without a coaster brake. Here it is! Hub: Sturmey-Archer S-RF3 3-Speed internal gear hub Rim: Sun CR18 rim (Presta drilled) Spokes: 36 DT stainless steel spokes. Twist shifter, cable, 18t cog and parts kit included. Silver hub. Satin finished silver rim The Sturmey hub has 127mm spacing. Will fit most steel frames. Overall axle length: 175mm

Internal Gear Conversion in a box! Fully assembled wheel with shifter & parts. Rim: 700c Sun CR18 silver. Presta drilled Hub: SG-S7001 Alfine 8 speed silver Spokes: 36 DT Competition double-butted, stainless steel with 12mm brass nipples Includes SL-S7000 Shifter Parts kit includes 23t sprocket and two set of non-turn washers (blue/green) & (White/Silver). 135mm rear axle spacing. Don't forget rim tape. Check the Related Items, below.

Formula/Mavic Front Wheel 36 Spokes This is the matching front wheel for the Origin8/Mavic Rear. Features the super Origin8/Formula track hub, 36 DT Champion double-butted stainless spokes and Mavic Open Elite rim. Standard 100mm spacing. The Formula hub is really nice, with sealed cartridge bearings. Machine built.

This is a nice, basic cassette wheelset with a traditional look. All silver. -Shimano Claris 2400 hubs work with 7-,8-.9- or 10-speed cassettes. -Trusty Sun CR18 silver (satin finish)rims. -Valve hole: presta drilled. -36 2.0 mm (14 ga.) DT stainless steel spokes. Standard 130 mm "road" spacing. QR Skewers included.

Singlespeed rear wheel with coaster (foot operated) brake. 700C Sun CR18 silver rim. Presta drilled. 36 Stainless steel spokes Shimano E-Type coaster brake hub. 110mm spacing. Can be re-spaced for 120, 126 or 130mm frame spacing (Pre-spaced: $6.00 upcharge - SEE RELATED ITEMS). Includes 18 tooth sprocket.. Don't forget rim tape. Check the Related Items, below.

Machine built. The rear hub will accept Shimano 11 speed mountain cassettes, M8000, M7000 & HG800.* The XT T780 hubs are non-disc for a more traditional look. For commuting and light touring. Hubs: Shimano Deore XT T780 8/9/10-speed. Silver. Rims: Velocity Dyad. Silver. Presta drilled. Spokes: 36 DT Competition Double-butted, stainless steel. Rear Hub Spacing: 135 mm. Recommended Tire Width: 28 mm and up. Will accept any Shimano-type cassette from HG on, 7-speed, 8-speed, 9-speed or 10-speed. (7-speed requires an additional 4.5 mm spacer to fill in the gap.) *Requires Shimano DynaSys shifter and rear derailleur. QR Skewers included. Front hub is standard 100 mm spacing.

Shimano Alivio M430 Front hub, silver, laced into Sun CR18 rim ( Presta drilled ) 36 DT 2.0 stainless steel spokes. This wheel is a good match for several of our rear wheels with the CR18 rim.

This wheel is a good match for several of our rear wheels with the CR18 rim. Hub: Shimano Deore M590 (NON-DISC)Front hub, silver Rim: Sun CR18 rim ( Presta drilled ) Spokes: 36 DT 2.0 stainless steel spokes. Silver hub. Satin silver rim. Don't forget rim tape. Check the Related Items, below.

This wheel set is a major upgrade for most Hybrid bikes. Rims: Sun CR18 double-wall rims w/eyelets. Presta drilled. Hubs: Shimano T4000 hubs Spokes: 36 DT stainless steel front and rear. QR Skewers included. Will accept any Shimano-type cassette made in the last 15 years, 7-speed, 8-speed, 9-speed or 10-speed. (7-speed requires an additional 4.5 mm spacer to fill in the gap.) Rear hub is 135mm spacing. Will not fit road bikes. Front hub is standard 100 mm spacing. Note: This wheel set is not intended for loaded touring.

Black Mavic/Origin8 Fixed/Free Flip-Flop Wheelset This high quality wheelset features" Black Mavic CXP Elite Semi-æro rims 32 Black DT Stainles Steel spokes Black Origin8/Formula high-flange sealed cartridge flip-flop hubs with track nuts. •Rear hub comes in 120mm (standard track) spacing. The stock axle is long enough to space out to 130 mm.

We will re-space to 126 or 130mm for $6.00 upcharge. SEE RELATED ITEMS BELOW. Does not include lockring nor sprocket

Don't forget rim tape. Check the Related Items, below.

This high quality wheelset features: Mavic CXP Elite Semi-æro rims in silver (machined sidewalls). 32 DT Stainles Steel spokes Origin8/Formula high-flange sealed cartridge flip-flop hubs with track nuts. Silver •Rear hub comes in 120mm (standard track) spacing. The stock axle is long enough to space out to 130 mm.

We will re-space to 126 or 130mm for $6.00 upcharge. SEE RELATED ITEMS BELOW. ONLY 126mm or 130mm APPLY! Does not include lockring nor sprocket

Hubs: Origin8 RD-2100 Sealed Cartridge Bearing Hubs. Rims: Weinmann LP18 with machined sidewalls Spokes: 36 2.0 mm DT Stainless Steel Spokes These wheels are a nice upgrade for older, mid-level 10- or 12-speed road bikes. Weinmann LP18 double-wall rims are light and fast. Outer width: 19mm Inner width: 13.6mm. Rims are drilled for Presta Tubes. 126 mm spacing, takes standard 5-, 6- or 7-speed freewheels. These wheels will work with any 622 mm (700C) tires up to 28 mm width. Don't forget rim tape. Check the Related Items, below. Choose 10mm width.