Skip to main content

Filter By:

Vintage Corner

Sunlite North Road Style Handlebar - Aluminum
Economy version of the classic handlebar used on English 3-speeds. These have a longer straight section (185 mm), making them more compatible with modern brake levers and grips. The standard 1" diameter clamp area is compatible with most stems, and is heavily knurled to prevent slippage. Will NOT accept bar-end shifters. 7/8" (22.2 mm) diameter takes "mountain bike" brake and shift controls. Width: 56cm Color: Silver Note: Some Nottingham Raleighs ( 1950s - 1960s) have a 15/16" handlebar clamp diameter. If you're replacing the handlebar on one, you should really replace the stem too, because it is unsafe to overspread the 15/16" stem to fit a standard 1" (25.4 mm) handlebar.
Sunlite Rod Brake Shoe (PAIR)
Replacement Pads for Rod Brakes. These have angled studs to fit the rod-operated "roller-lever" brakes used on classic 28 inch wheel English roadsters, and similar bikes. 45 mm long. Made in Taiwan
Sunlite Schwinn-type Grips (Pair)
These soft krayton rubber grips are very similar to those used for many years on classic Schwinns. Available in black and white. Sold as Pair
Sunlite Side-Pull Brake Caliper Set 74 to 91mm Reach
Click here to determine the correct brake reach for your bike. If you don't like the look of the Odyssey 1999 brakes, these calipers & levers have a much more traditional look for your old Raleigh three-speed. NOTE: These brakes fit some, but not all, 3-spd bikes with 26x1-3/8 tires. Be sure to use the above link and measure the actual reach on your brakes. Comes with front & rear brakes, levers & cables. -Material: Aluminum -Standard nut mount
Sunlite Steel 1-inch–21.1mm Threaded Headset
This headset will fit old American bikes like Schwinn, Huffy and Murray. - Inside diameter is 21.1mm - Steel cups - Steel retainer bearings - Steerer Dia: 25.4mm - Cup Dia: 32.5mm
Panaracer 27
Japanese quality, high performance tires with classic look. Very comfortable ride. Wire bead. Black w/Tan sidewall
New Albion Crank Set XDD Compact Double 110mm 46-34 teeth
Nicely finished, with silver arms and alloy chainrings. High quality, Japanese type forging. 9/10/11 speed compatible Uses standard square taper bottom bracket. Recommended BB spindle length: 110mm for 47.5mm chainline 107mm for 45mm chainline
New Albion Crankset XDT 110/74mm 48-36-26 teeth
Forged alloy crank arms with alloy chainrings. Includes left arm. High quality, Japanese type forging. 9/10/11 speed compatible Uses standard JIS square taper bottom bracket. Length: 113mm for 47.5mm chainline Length: 110mm of 45mm chainline 110mm / 74mm chainring bolt pattern.
Jagwire Huret Type Inner Shift Cable
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. The Huret "disc" end will also work with vintage Suntour X-Press MTB shifters.
Page 1 of 1