Filter By:

Tools

Brompton Tool Kit
$75.00
The new Brompton Tool Kit stores inside the short front section of the main frame tube on Bromptons manufactured after 2005. It's an ingenious little gem that contains most any tool you might need to keep your Brommie running: - Tire levers with 8mm + 10mm spanners - 15mm spanner with ratchet driver - Pozi (Phillips) + flat screwdriver bit - 2.5mm + 5mm bit - 3mm + 4mm bit - 2mm + 6mm bit - Puncture repair patches - Sandpaper
Park Tool CN-10 Cable cutter
$36.95
The CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing. -Cold forged, heat treated steel handles for strength -Precision ground cutting jaws for a clean cut on every cable -Built in crimper for cable end caps and forming hole for reforming housing ends and housing ferrules -Wire latch holds handles together when not in use
Park Tool CT-3.2 Pro Shop Chain Tool
$35.95
The ultimate. Along with superior strength and durability, the CT-3.2 features a handy "loosening shelf" to remedy stiff links after reassembly. The fine thread and comfortable size enable easy removal of even the toughest chain pins. Like all Park Tool Chain Tools, it's easy to use and built to last. NOTE: The "sliding shelf" is supposed to be free floating. Do not try to tighten it!" Works great on 5 to 11 speed (not Campy 11) chains.
Park Tool SR-1 Sprocket remover, chain whip
$29.95
A chain whip is used in conjunction with a cassette lockring remover to remove a cassette type gear cluster. It keeps the cassette freehub body from ratcheting backwards while the lock ring is being unscrewed. The chain whip is also used as a wrench to unscrew threaded sprockets. Features hex socket to hold a Park freewheel puller. Fits 3/32" cogs only.
Park Tool Chain Checker
$27.95
To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!
BikeWipz Bicycle Cleaning Wipes
$8.00 - $25.00
Multi-use cleaning wipes. Quick, clean and easy! Clean, polish and protect frame and fork! Wipe off chain and drivetrain. Mobile: Plant based cleaner - hand safe clean-up after on the road repairs. Available in a bag of 10 or box of 40.
Park Tool HCW-16 Chainwhip & 15mm Pedal Wrench
$24.95
A chain whip is used in conjunction with a cassette lockring remover to remove a cassette type gear cluster. It keeps the cassette freehub body from ratcheting backwards while the lock ring is being unscrewed. The chain whip is also used as a wrench to unscrew threaded sprockets. Features a 15mm pedal wrench on the other end. Fits 3/32" cogs only.
Park Tool BBT-22 Shimano Bottom Bracket Tool
$19.95
Removes Shimano cartridge bottom brackets, like BB-UN5x and BB-UN7x series. More Heavy-Duty than the BBT-2 (discontinued). Newer version is compatible with Shimano "pipe billet" splined axles..
Park Tool CT-5
$16.95
This small chain tool goes anywhere and actually performs like a shop quality tool. The fine thread, special "V"-shaped handle, and super strong replaceable pin make chain removal and installation a breeze. The CT-5 works on any derailer chain (including Hyperglide®) and has a "shelf" for loosening tight links. At only 77 grams, it1s the perfect take-along chain tool. Works great on 9 speed chains as well.
Park Tool HCW-17 Fixed Gear Lock Ring Wrench
$16.95
A lockring tool specifically for fixed gear! Two different radius hooks to fit most fixed gear lockrings.
Park Tool CCP-22 Cotterless crank puller with handle.
$15.95
For traditional tapered square bottom bracket axles/cranks.
Park Tool FR-6 BMX 4 prong Tool for Singlespeed Freewheel Removal
$15.95
BMX 4 prong puller. Fits over 15 mm axles. Fits most singlespeed freewheels.
Park Tool HCW-5 Lock Ring Wrench
$15.95
The HCW-5 has a single hook lockring wrench on one end, which fits all bottom bracket lockrings and track sprocket lockrings. The other end has a 3 prong lockring wrench, which gets a better grip on some 6-notch bottom bracket lockrings, so it is less likely to mark them up.
Park Tool MLP-1 Chain Master Link Pliers
$15.95
Park MLP-1 Master Link Pliers Many derailer chains, especially our favorite SRAM brand, use a "master link" (SRAM calls it a "Power Link") that allows the chain to be installed and removed by hand. While this type of masterlink doesn't require a traditional chain tool, over time, dirt and corrosion can make it difficult to separate by hand. MLP-1 Master Link Pliers make removal and replacement of these masterlinks quick and effortless. Simply insert the specially sized jaws into the masterlink and squeeze the handles.
Park Tool CWP-7 Universal Cotterless crank puller for splined or square type cranks
$14.95
This unit works on all cranks that use normal 22 mm extractor threads, including Shimano Octalink splined and I.S.I.S. splined, as well as almost all square taper cranks. Replaces the CWP-6
Park Tool HCW-18 Bottom Bracket Wrench for One-Piece Cranks
$14.95
The double-ended HCW-18 spanner fits slotted adjusting cones found on some one-piece cranks. The opposite end fits three-notched fixed-cones on some one piece cranks.
Phil Wood Grease
$14.95
A highly waterproof grease, excellent for hubs, headsets, and bottom-bracket bearings. This is the best I've used for adverse weather conditions. 3 ounce tube.
Phil Wood Tenacious Oil
$14.95
My favorite lubricant. Good for chains, threaded fasteners, brake and derailer pivot points, general light lubrication. Long-chain polymers keep it stuck to what you put it on. 4 ounce drip bottle.
Park Tool Home Mechanic Pedal Wrench
$12.95
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.
Park Tool Hex Wrench Set (4, 5, 6 mm)
$11.95
The AWS-1 is one of Park's most-popular tools because it fits the most-turned bicycle bolts. It features 4, 5, and 6mm Allen wrenches in a Y shape for excellent leverage. Each Allen is vinyl coated for comfort.
Park Tool Fold-Up Hex Wrench Set
$10.95
The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx compatible driver into one convenient fold-up tool. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.
Park Tool Folding Hex Wrench Set (1.5-6mm)
$10.95
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
Minoura Aluminum Tire Lever Set
$9.95

Minoura Aluminum Tire Lever Set

The one we use.
Park Tool FR-2 Suntour 2-Prong Freewheel Remover Tool
$9.95
Sun Tour 2 prong.Note: Old-style 2 prong pullers must be used with extreme care, and even then they may destroy the freewheel. They must be secured with the QR skewer or axle nut so they won't slip and ruin the freewheel.
Park Tool SPA-1 Adjustable Pin Spanner GREEN
$9.95
Adjustable Pin Spanner. The green handled SPA-1 fits adjusting cups on many adjustable type bottom brackets.
Park Tool Cone Wrench SCW-13 13 mm
$8.95
13 mm fits most front hubs. You will need 2 to adjust the bearings.

Single-ended cone wrenches, with padded handles. These are the new-style laser-cut model, very much better than the old chrome-plated versions.

Park Tool Cone Wrench SCW-14 14 mm
$8.95
14 mm fits Campagnolo, Dura Ace size. You will need 2 to adjust the bearings. Buy 2. Single-ended cone wrenches, with padded handles. These are the new-style laser-cut model, very much better than the old chrome-plated versions.
Park Tool Cone Wrench SCW-15 15mm
$8.95
15 mm fits most rear hubs. Buy 1 for cassette hubs, or 2 for other rears. Single-ended cone wrenches, with padded handles. These are the new-style laser-cut model, very much better than the old chrome-plated versions.
Park Tool Cone Wrench SCW-16 16 mm
$8.95
16 mm fits English 3 speeds. Front and rear. Single-ended cone wrenches, with padded handles. These are the new-style laser-cut model, very much better than the old chrome-plated versions.
Park Tool Cone Wrench SCW-17 17mm
$8.95
17 mm fits locknut on many track hubs. Also needed for Shimano Nexus generator hubs, and a few others. Single-ended cone wrenches, with padded handles. These are the new-style laser-cut model, very much better than the old chrome-plated versions.
Page 1 of 2 Next page