- Bottom Bracket Tools (3)
- Cable Tools (1)
- Cassette (1)
- Chain Tools (3)
- Chain Whips (1)
- Crank Tools (2)
- Lubricants & Cleaners (3)
- Cone Wrenches (7)
- Show More Categories
- Freewheel Pullers (2)
- Lock Ring Tools (2)
- Multi-tools (4)
- Pedal Wrenches (1)
- Tire & Tube Repair (2)
- Wheel Building (2)
- Show Fewer Categories
Feather edge patches result in a smooth, seamless tube repair, designed to eliminate bulges on high-pressure tires. Each Kit Includes: 4 round tube patches, 1 oval tube patch, 1 emery paper, 1 tube of CFC-free cement
A highly waterproof grease, excellent for hubs, headsets, and bottom-bracket bearings. This is the best I've used for adverse weather conditions. 3 ounce tube.
My favorite lubricant. Good for chains, threaded fasteners, brake and derailer pivot points, general light lubrication. Long-chain polymers keep it stuck to what you put it on. 4 ounce drip bottle.
OK for home mechanics, but you may need to wear a glove to protect your hand for dealing with really tight cones. laser-cut model, very much better than the old chrome-plated versions. The 14 mm has very few applications, save your money unless you know you need this size.
OK for home mechanics, but you may need to wear a glove to protect your hand for dealing with really tight cones. laser-cut model, very much better than the old chrome-plated versions. This is the useful size. Fits most front and rear hubs. Buy 2.
OK for home mechanics, but you may need to wear a glove to protect your hand for dealing with really tight cones. laser-cut model, very much better than the old chrome-plated versions. The 16 mm has very few applications, save your money unless you know you need this size.
Removes Shimano cartridge bottom brackets, like BB-UN5x and BB-UN7x series. More Heavy-Duty than the BBT-2 (discontinued). Newer version is compatible with Shimano "pipe billet" splined axles..
Fits European-sized nipples (including DT and Wheelsmith.)
For traditional tapered square bottom bracket axles/cranks.
The CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing. -Cold forged, heat treated steel handles for strength -Precision ground cutting jaws for a clean cut on every cable -Built in crimper for cable end caps and forming hole for reforming housing ends and housing ferrules -Wire latch holds handles together when not in use
This small chain tool goes anywhere and actually performs like a shop quality tool. The fine thread, special "V"-shaped handle, and super strong replaceable pin make chain removal and installation a breeze. The CT-5 works on any derailer chain (including Hyperglide®) and has a "shelf" for loosening tight links. At only 77 grams, it1s the perfect take-along chain tool. Works great on 9 speed chains as well.
This unit works on all cranks that use normal 22 mm extractor threads, including Shimano Octalink splined and I.S.I.S. splined, as well as almost all square taper cranks. Replaces the CWP-6
13 mm fits most front hubs. You will need 2 to adjust the bearings.
Single-ended cone wrenches, with padded handles. These are the new-style laser-cut model, very much better than the old chrome-plated versions.
14 mm fits Campagnolo, Dura Ace size. You will need 2 to adjust the bearings. Buy 2. Single-ended cone wrenches, with padded handles. These are the new-style laser-cut model, very much better than the old chrome-plated versions.
15 mm fits most rear hubs. Buy 1 for cassette hubs, or 2 for other rears. Single-ended cone wrenches, with padded handles. These are the new-style laser-cut model, very much better than the old chrome-plated versions.
17 mm fits locknut on many track hubs. Also needed for Shimano Nexus generator hubs, and a few others. Single-ended cone wrenches, with padded handles. These are the new-style laser-cut model, very much better than the old chrome-plated versions.
Shimano large spline current model, 12 splines 20.0 mm I.D. (also works for most HG cassette lockrings.) -Thin wall construction allows use without removal of cones and locknuts -One inch base fits wrench or bench vise -Also fits Sachs Aris, Sunrace, DNP Epoch and other 5 -10 speed freewheels
Shimano HG/IG cassette lockring remover for all Shimano and Shimano-compatible cassette lockrings. -One inch base fits wrench or bench vise with ease -Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings
BMX 4 prong puller. Fits over 15 mm axles. Fits most singlespeed freewheels.
The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx compatible driver into one convenient fold-up tool. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
A lockring tool specifically for fixed gear! Two different radius hooks to fit most fixed gear lockrings.
The double-ended HCW-18 spanner fits slotted adjusting cones found on some one-piece cranks. The opposite end fits three-notched fixed-cones on some one piece cranks.
The HCW-5 has a single hook lockring wrench on one end, which fits all bottom bracket lockrings and track sprocket lockrings. The other end has a 3 prong lockring wrench, which gets a better grip on some 6-notch bottom bracket lockrings, so it is less likely to mark them up.
The AWS-1 is one of Park's most-popular tools because it fits the most-turned bicycle bolts. It features 4, 5, and 6mm Allen wrenches in a Y shape for excellent leverage. Each Allen is vinyl coated for comfort.
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.
Park MLP-1 Master Link Pliers Many derailer chains, especially our favorite SRAM brand, use a "master link" (SRAM calls it a "Power Link") that allows the chain to be installed and removed by hand. While this type of masterlink doesn't require a traditional chain tool, over time, dirt and corrosion can make it difficult to separate by hand. MLP-1 Master Link Pliers make removal and replacement of these masterlinks quick and effortless. Simply insert the specially sized jaws into the masterlink and squeeze the handles.
Adjustable Pin Spanner. The green handled SPA-1 fits adjusting cups on many adjustable type bottom brackets.
Fits OEM Asian spokes. .136"
3 Nylon Levers with Plastic holder.
Page 1 of 2 Next page