Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Crank Parts

Wheels Manufacturing Inc. 29mm ID x 0.5mm Crank Spindle Spacer, Bag of 10
$12.45
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. for use with SRAM DUB cranks - 10 spacers per bag - Machined engineering-grade Delrin
Wheels Manufacturing Inc. 29mm ID x 1mm Crank Spindle Spacer, Bag of 10
$12.45
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 1.0mm thick - 10 spacers per bag - Machined engineering-grade Delrin
Wheels Manufacturing Inc. 30mm ID Crank Spindle Spacer
$4.50 - $6.25
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
Wheels Manufacturing Inc. 386 EVO Adapter for 22/24mm Spindle Cranks
$55.95
The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers
Wheels Manufacturing Inc. 386 EVO Adapter for 24mm Spindle Cranks
$54.45
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers
Wheels Manufacturing Inc. 46mm ID Bottom Bracket Spacer Pack
$23.45
These are 46mm inside diameter cup spacers that fit between a bottom bracket cup and the frame. Machined from 6061 aluminum and anodized black, these spacers can be used for a few different scenarios. First, when used with a Wheels Manufacturing GXP compatible bottom bracket, adding cup spacers between the non-drive side cup and the frame will move the chainrings on a GXP crank closer to the frame (reducing the chainline). Second, for Specialized road frames with the 61mm wide Carbon OSBB shell, you would place 3.5mm of spacers between each cup to effectively widen the BB shell to 68mm when used with non-Specialized cranks. One bag will properly space one 61mm wide Specialized OSBB shell to 68mm. Specs - Bottom Bracket/Frame Interface: Any 46mm ID BB shell: PF30, Specialized Carbon OSBB, 386EVO, 392EVO, BBRIGHT - Inside Diameter: 46.20mm - Outside Diameter: 52.00mm Bag Includes: - 2.5mm bottom bracket cup spacers (46mm ID) x 2 - 1.0mm bottom bracket cup spacers (46mm ID) x 4
Wheels Manufacturing Inc. BB/PF30 Universal Adapter for 22/24mm Spindle Cranks (SRAM/TruVativ)
$43.45
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30
Wheels Manufacturing Inc. BB30 Adapter for 22/24mm Spindle Cranks
$44.45
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. BB30 Adapter for 24mm Spindle Cranks
$44.95
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. BBright Adapter for 22/24mm Spindle Cranks
$56.95
The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr
Wheels Manufacturing Inc. BSA Bottom Bracket Spacer
$5.45 - $7.95
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
Wheels Manufacturing Inc. Crank Spindle Spacer
$10.95 - $11.45
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
Wheels Manufacturing Inc. Crank Spindle Wave Washer
$16.50
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
TruVativ M15/M22 GXP Crank Arm Self-Extracting Bolts
$12.45
TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included
TruVativ Stylo All Mountain Guard
$46.00
TruVativ's Stylo All Mountain Guard is all-mountain chainring protection with style. This 4mm thick aluminum guide is 4 bolt, 104 BCD compatible.
Stolen Chromoly 19 x 8 Spline Crank Spindle
$11.99
- Material: Heat-treated 4130 Chromoly - Splines: 8 - Diameter: 19mm - Length: 5.7/8" (150mm) - Spindle Bolts: 8x1mm (Included) - Compatibility: Fits Stolen OEM/MOB/SIC Mission Transit, Rant 8-S, Sunday Saker and most other 19mm, 8 spline cranks
SRAM Carbon Crank Arm Boot
$14.45
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.
SRAM Carbon Crank Arm Boots
$13.45
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
SRAM Force Crank Spider
$43.95
SRAM Force crank spiders are for repairing your crank or converting it to different gearing. Available in 110mm and 130mm BCDs.
North Shore Billet 2x10 Spider for SRAM GXP Cranks
$70.45
The North Shore Billet 2×10 Spider replaces the stock chainring spider so that you can run smaller chainrings on SRAM XX1, X01, X1, X0, X9, X7, and GX cranks using GXP bottom brackets. With the NSB 2×10 Spider you can run a more traditional 22/32T or 24/34T combination. The NSB 2×10 Spider is designed to use any standard 64 / 104 BCD 9 speed chainring. The distance between the rings and the distance from the centre of the bottom bracket is the same as the 120 BCD spider so the set up is simple and the shifting is quick!
FSA BB-386EVO/Press-Fit BB30 Bearing Assembly
$53.95
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
Easton EC90 SL Crank Spindle
$106.45
Replacement crank spindle for Easton EC90 SL cranks
Easton EC90 SL Spider and Ring Assembly
$149.99
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
Easton Spider & Ring Assembly
$180.95
Easton spider and ring assemblies for CINCH cranks.
Dimension Bash Guard
$44.99
Aluminum bash guard.
Page 1 of 1