Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cranks

All-City Cross Wizard Chainring Guard
$45.00
All-City's lightweight Cross Wizard chainring guard is the perfect addition to a single ring or singlespeed setup. While not a full-on mountain bike ‘bash guard’ these are just the thing to keep your chain on and your teeth intact. Named after the one and only Cross Wizard! (You have to say it like that, with the exclamation at the end.) These are available in 110mm and 130mm bolt circle diameters for all your ‘crossy needs. - Material: CNC machined 6061-T6 aluminum
All-City 612 Track Crank
$140.00
The 612 Track Crank is an extremely stiff and strong 144mm BCD track crank. It’s at home as much on the busy avenues of your city as it is on the boards of the velodrome. All-City sweats the details, so the 612 (Minneapolis’ area code) is cold-forged, resulting in a tight grain structure. The upshot is that it’s strong, which means more riding and less worries for you. It utilizes the classic JIS square taper spindle and comes with a color-matched, 46-tooth, 1/8th chainring.  - Recommended Spindle Length: 110mm - Spindle Interface Type: square taper JIS - Bolt Pattern: 5-bolt - BCD: 144mm - Chain Compatibility: 1/2-inch x 1/8-inch - Weight: 726g w/ ring and bolts - Bottom bracket and retaining bolts not included
Campagnolo Chorus Crankset
$525.00
Campagnolo is all about drivetrain evolution, and their Chorus Crankset proves it. The full-carbon cranks and 4-arm spider feature a unified bolt pattern that allows for all three chainring standards. This design incorporates an 8-bolt pattern with a spider arm that not only holds the chainring in place by way of the bolt, but also supports the chainring to increase system rigidity. The crank arms and spider are hollow for maximum stiffness and minimal weight. The integrated Ultra-Torque spindle joins the crankset together via a toothed Hirth joint in the center. - Chainring BCD: Campagnolo 146 Asymmetric, Campagnolo 112 Asymmetric
Campagnolo Record 12x2 Speed Crankset
$580.00
The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Campagnolo Super Record 12x2 Speed Crankset
$1,035.00
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Dimension Cruiser One-Piece Crankset
$27.99
Dimension Cruiser one-piece hot-forged chromoly steel cranks. - One-piece, hot-forged chromoly steel crank - Cruiser chainwheels sold separately - Requires 24 tpi American bottom bracket - Crankset has 1/2-inch pedal threading
Dimension Bash Guard
$39.99 - $44.99
Aluminum bash guard.
Dimension Cross Crank Arm Set
$59.99
Dimension Cyclocross Arm Sets made of 6061-T6 aluminum. - Forged AL-6061-T6 - BB Not Included - Chainrings Not Included - 110/74 BCD - Drivetrain Speeds: 10, 9, 8 - Number of Chainrings: Double - Pedal Spindle: 9/16-inch - Spindle interface Type: Square Taper JIS - Weight: 590g
Easton EC90 SL Crank Spindle
$89.99
Replacement crank spindle for Easton EC90 SL cranks
Easton EC90 SL Spider and Ring Assembly
$149.99
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
FSA BB30 Crank Bolts
$13.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
FSA BB-386EVO/Press-Fit BB30 Bearing Assembly
$49.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
FSA Gossamer Pro ABS BB386EVO Crankset
$168.99
Not ready for carbon? The FSA Gossamer is a high-end crankset for aluminum lovers. With an impressive history of wins on the brutal cobbles of Paris-Roubaix, it needs no further introduction, yet the details shouldn’t be ignored. The cold-forged aluminum arms are heavily scalloped for maximum strength-to-weight ratio. The versatile BB368EVO spindle is forged from an even stronger material and is compatible with virtually every frame standard available by choosing the appropriate BB. The chainrings are CNC-machined from 7075 aluminum, then recess-machined and pinned for rapid and precise shifting. Asymmetric Bolt Spacing boosts overal stiffness without adding weight, strategically spacing the chainring bolts to provide optimum strength from a 110mm BCD. The Gossamer fits nearly any combination of bike, rider, and riding styles. - Cold forged AL6061/T6 aluminum crank arms - Forged AL7050 BB386EVO spindle - AL7075 CNC chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Bottom brackets sold separately; BB selection will depend on frame shell interface
FSA Gossamer Tandem Crankset (Rear)
$269.99
Harness the power of your tandem team with FSA's Gossamer MegaExo Tandem Crankset. The rear crankset features cold-forged aluminum crankarms, hill-topping 52/39/30 chainrings, a 42-tooth idle chainring, and a proprietary spacer system to fine-tune your chainline.
FSA SL-K Modular BB386EVO Crankset
$347.99
SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and BCD 90 inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems
North Shore Billet 2x10 Spider for SRAM GXP Cranks
$70.00
The North Shore Billet 2×10 Spider replaces the stock chainring spider so that you can run smaller chainrings on SRAM XX1, X01, X1, X0, X9, X7, and GX cranks using GXP bottom brackets. With the NSB 2×10 Spider you can run a more traditional 22/32T or 24/34T combination. The NSB 2×10 Spider is designed to use any standard 64 / 104 BCD 9 speed chainring. The distance between the rings and the distance from the centre of the bottom bracket is the same as the 120 BCD spider so the set up is simple and the shifting is quick!
Problem Solvers Hex Crank Arm Fixing Bolt/Cap
$4.99
Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair
SR Suntour XCT Left Crank Arm
$15.00
SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.
SR Suntour XCM-T Crankset
$35.00
Suntour's XCM-T is a 9-speed triple crankset with melt forged alloy arms that comes in either square taper or Octalink bottom bracket options. - Steel chain rings - Forged alloy crank arms - 50mm chain line with a 113mm BB
SRAM Carbon Crank Arm Boot
$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.
SRAM Carbon Crank Arm Boots
$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
SRAM Force Crank Spider
$43.00
SRAM Force crank spiders are for repairing your crank or converting it to different gearing. Available in 110mm and 130mm BCDs.
SRAM S600 3.0 Crankset (42/32/22)
$48.00
SRAM's S600 3.0 Crankset features forged arms for increased strength and reliability paired with smooth shifting chainrings for the best combination of looks, performance and price.
SRAM EX1 Crankset
$55.00
Lightweight, durable, stiff and designed specifically to work with Bosch and Brose mid-ship motors, SRAM's EX1 crankarms are purpose built for the high-torque E-MTB environment. - Proven SRAM technologies adapted for the demands of midship-motor E-MTBs - Compatible with Bosch, Brose and Yamaha bottom bracket interfaces - Arm Material: Aluminum - Colors: Black - Bottom Bracket Interface: ISIS
SRAM NX Eagle Boost DUB Crankset
$105.00
The SRAM NX crankset delivers Eagle styling and performance to the newest addition to the Eagle ecosystem. Designed for SRAM's X-SYNC 2 chainrings, the NX crankset is engineered for complete chain control—each tooth's profile is precisely engineered to work quietly, efficiently, and securely with the Eagle chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design, which together allows for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of performance and durability. - 6000 series forged aluminum arms - 52.0mm chainline
SRAM NX Eagle DUB Crankset
$105.00
The SRAM NX crankset delivers Eagle styling and performance to the newest addition to the Eagle ecosystem. Designed for SRAM's X-SYNC 2 chainrings, the NX crankset is engineered for complete chain control—each tooth's profile is precisely engineered to work quietly, efficiently, and securely with the Eagle chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design, which together allows for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of performance and durability. - 6000 series forged aluminum arms - 49.0mm chainline
SRAM Apex 1 Crankset
$108.00 - $128.00
- Chainrings Included: Yes - Number of Chainrings: Single - Pedal Spindle: 9/16" - Rings: 42-tooth
SRAM GX-1000 1x Crankset
$117.00
SRAM's GX-1000 1x Crankset delivers consistent performance every time out. Featuring SRAM’s X-Sync tooth profile, the GX crankset is engineered for complete chain control. Each tooth’s thickness is CNC machined to work seamlessly with the chain’s inner and outer links. - Compatible with X-Sync chains - 6000 series AL - CNC machined 7075, two-tone anodized X-Sync chainring - Bottom bracket configurations: BB30, GXP, and Fat Bike GXP - Compatibility: Boost 148 hub or standard hub - Bottom bracket sold separately
SRAM NX Eagle Fat4 DUB Crankset
$121.00
The SRAM NX crankset delivers Eagle styling and performance to the newest addition to the Eagle ecosystem. Designed for SRAM's X-SYNC 2 chainrings, the NX crankset is engineered for complete chain control—each tooth's profile is precisely engineered to work quietly, efficiently, and securely with the Eagle chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design, which together allows for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of performance and durability. - 6000 series forged aluminum arms - 66.5mm chainline
SRAM NX 1x X-Sync Crankset
$125.00
The SRAM NX crankset provides high performance at the right price. Featuring the SRAM engineered X-SYNC chainring, the NX crankset is engineered for complete chain control. Each tooth’s thickness is CNC machined to work seamlessly with the chain’s inner and outer links. Personalize your gearing with five available chainrings. - 6000 series aluminum arms - BOOST 148 compatible - Fully compatible with all SRAM 1x drivetrains - Arm Material: Aluminum - Chainring Material: Aluminum - BCD: 94mm - Weight: 680–780 grams - Interface: 24mm *Bottom bracket sold separately
Page 1 of 5 Next page