Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Accessories

Planet Bike Bottle Blinky Side Light
$19.99
Cage mounted amber side light Be seen from the side when you’re on the go with the Bottle Blinky. It mounts discreetly under your waterbottle cage but provides dynamic side visibility in three flavors: steady, Courtesy pulse and Superflash. - 6 high output surface mounted amber LEDs provide steady, Courtesy & Superflash modes - FL1 Tested - Run times: 24 hrs (steady – 7 lm), 27 hrs (Courtesy – 3-7 lm) and 106 hrs (Superflash – 7 lm) - Amber side lights provide 150° of side visibility on each flank - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Mounts to water bottle mounts on downtubes and seat tubes - 58 grams
Planet Bike Superflash 65 Bike Tail Light
$23.45
The Superflash 65 brings a whole new level of versatility to battery powered tail lights. With four modes (High, Low, Courtesy and Superflash) this tail light provides 65 lumens and 220° of visibility that will get you noticed day or night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 40 hrs (high – 30 lm), 90 hrs (low – 7 lm), 45 hrs (Courtesy - 20-60 lm) and up to 130 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and horizontal clip mount for multiple mounting options - 70 grams
Planet Bike Spok Light Set
$23.99
Looking for a bright, small set of lights you can mount almost anywhere? Planet Bike’s Spok Set is the logical choice. The translucent case offers 220 degrees of visibility. Steady and flashing modes give you up to 100 hours of run time. Rubber mounting straps allow for mounting on handlebars, helmets, and seat posts of all shapes and sizes. These lights are so small they almost disappear in a jersey pocket, so there's no reason not to throw them in before you take off on a warp-speed ride.
Planet Bike Shiner Back Tail Light
$39.99
28 LED PB Power Array rechargeable tail light The Shiner Back tail light has got your back! Its linear design integrates smoothly to your bike whether mounted to your seat post, seat stay, rack, helmet or fenders. The 28 LED PB Power Array will make sure you stand out in traffic whether it’s day or night. - PB 28 LED Power Array provides steady, Courtesy & Superflash mode - FL1 Tested - Run times: 2 hrs (steady – 23 lm), 3.5 hrs (Courtesy - 7-20 lm) and 11.5 hrs (Superflash - 23 lm) - Provide 180° of visibility - Dust & water resistance rated to IP64 standard - 370 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Smart Charging Technology with built in low battery indicator - Highly visible, even in daylight - Includes standard strap and the Shiner Helmet/Rack bike light bracket for seat post, seat stay, rear rack or helmet mounting - The Shiner Back can also mount to Cascadia ALX bike fenders with the Fender Bracket (#3087-1) which is sold separately - 30 grams
Planet Bike Shiner Headlight
$39.99
28 LED PB Power Array rechargeable headlight Put your light where you like it. The super bright Shiner headlight adds streamlined visibility whether mounted to your handlebars, helmet, fork blade or head tube. - PB 28 LED Power Array provides steady, Courtesy & Superflash modes - FL1 Tested - Run times: 2 hrs (steady – 56 lm), 4.5 hrs (Courtesy - 16-50 lm) and 13 hrs (Superflash - 56 lm) - Provides 180° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 370 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Includes standard and long strap to accommodate multiple mounting options - Also mounts to helmets, front racks and non-traditional applications with the Shiner Helmet/Rack Bracket (part# 3087-2) which is sold separately - 30 grams
Planet Bike Current 500 PlugnPlay eBike Headlight
$59.99
The Planet Bike Current 500 front white head light is designed to illuminate the path ahead whenever you hop on your electric bike. Whether you’re upgrading the light that came spec’d on your E-bike or adding a front light, the Current 500 is a great choice. The OSRAM LED delivers 500 lumens and the precision fish eye Clean Beam lensing creates a horizontal cut-off beam that won’t blind oncoming cyclists and path users. The sleek, rugged and compact form is constructed of aluminum alloy and mounts neatly to your bike’s fork crown. The mounting bracket’s dual pivot points let you fine tune the beam to ideally project light for a safe ride day or night. The Current 500 includes a Bosch system plug for clean installation into the front light outlet on your Bosch-powered E-bike. Don’t worry if you ride an electric bike powered by Shimano, Toshiba, Stromer and other motor systems because the Current power cable can be modified to work with most systems. Great optics, abundant lumen output and clean design make Planet Bike's Current 500 a smart choice for E-bike cyclists. Be safer and brighter on the path without blinding your fellow riders! PRECISION BEAM Osram High output LED provides steady 500 lumens with clean beam cutoff lens PLUGS INTO BOSCH DC 6-15V BATTERY Easily plugs into Bosch batteries. Can be modified to fit Toshiba and Shimano batteries. MULTI PIVOT INSTALLATION Get the light where you want it with two pivot point bracket - OSRAM KW H2L531.TE LED provides a 500 lumen high power beam - FL1 Tested - Steady mode (500 lm) - Provides 240 degrees of visibility for daytime traffic and provides optimal lighting for nighttime riding - Clean Beam Design - Precision Clean Beam cut-off lens is designed with your fellow riders in mind. Provides for courteous, anti-glare illumination on the ground ahead of you and not into the eyes of oncoming riders. - Front Fork Crown Mounted - Securely mounts to your E- bike's fork crown with mounting bracket with two robust pivot points that allow for beam angle adjustability. - Water resistantance rated to IPX6 standard - Electric Bike Compatible - Includes a Bosch E-bike system plug for clean installation to Bosch-powered electric bikes. A certified mechanic is recommend for installation on other systems. - Compatible with any 6V-15V e-bike system - Cable length is 56" - 116 grams
Portland Design Works Tail Light Rack Bracket
$7.95
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
Portland Design Works Red PlanetTaillight
$15.00
Portland Design Works' Red Planet Taillight will enhance your visibility after dark. It boasts five bright LEDs with three modes to notify others of your presence. And, the Red Planet includes mounts for a seatpost, seatstay, and backpack, so you can put it wherever you want. - Five red LEDs - Steady, blinking and dance modes - Stayputnik mount included - Runs on 2xAAA batteries (included) - Weatherproof exterior for all season riding - Weight: 45 g (1.6 oz)
Portland Design Works Spaceship 3 Headlight
$20.95
Put on the high beams for extra visibility even in the dark corners of space. Portland Design Works' Spaceship Headlight boasts 3 bright LEDs which shine through a precision lens for a bright, focused beam. It offers steady and flashing modes and has a run time of over 100 hours. - Fits 22.0-31.8mm handlebars - Runs on 2 x AA batteries (included) - 100 hours run time - Steady and flashing modes - 91 grams/3.2 ounces - 98 x 41 x 35mm
Portland Design Works Fenderbot Taillight
$26.00
Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty
Portland Design Works Asteroid USB Tail Light
$29.00
Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)
Portland Design Works Radbot 1000 Taillight
$29.00
Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty
Portland Design Works Asteroid USB Headlight
$30.45
Minimal and mighty! The USB rechargeable Asteroid headlight from Portland Design Works mounts in seconds and shines super brightly with high-quality optics so you can be seen. Ride for up to 24 hours before needing a new charge. - 3 Modes (burn time): Flash (24 hrs), Pulse (5 hrs), Steady (4 hrs) - UV Proof rubber mount  - Double-click lens to turn on/off - Micro USB charge cord included - Weatherproof exterior for all season riding - Weight: 73 g (2.6 oz)
Portland Design Works Danger Zone Taillight
$31.95
Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)
Portland Design Works Daybot
$35.00
The Portland Design Works Daybot Tail Light has a CREE LED to power a 100 lumen Daytime Pulse mode for increased visibility on sunny days. Switch from Day Modes to Night Modes to conserve battery power. Hold the power button down for 1 second to turn the light on or off. The Daybot Tail Light has redesigned mount that works with the included seatpost and seatstay brackets. - 2 Day Modes (runtime): Solid - 60 lumens (6 hours), Pulse - 100 lumens (20 hours) - 3 Night Modes (runtime): Solid - 20 lumens (20 hours), Flash - 20 lumens (100 hours), Pulse - 20 lumens (30 hours) - USB rechargeable li-polymer battery - Weatherproof exterior for all season riding - Includes brackets for seatpost and seatstay mounting - Mounts vertically or horizontally - Includes Micro USB recharging cord - Weight: 1.9 oz - Lifetime Warranty
Portland Design Works Spaceship 3 Headlight/Red Planet Taillight Set
$36.95
Portland Design Works' Spaceship 3 Headlight/Red Planet Taillight Set offers bright LED lights, front and rear, for super nighttime visibility. The Spaceship 3 headlight focuses three brilliant LEDs through a precision lens, illuminating your course ahead. Powered by 2xAA batteries, the Spaceship 3 includes both steady and flashing modes for up to 100 hours of run time. Includes the Mission Control 2.0 mount. The Red Planet is a bright, budget-friendly tail light that burns with the power of five red LEDs. The Red Planet runs on 2xAAA batteries and has three modes: steady, blinking, and dance. The Stayputnik seat post mount, with a UV-proof rubber strap, is included. Spaceship 3: - Three bright white LEDs - Runs on 2xAA batteries (included) for up to 100 hours of run time - 2 Modes: Steady and Flashing   - Includes Mission Control 2.0 mount  - Weatherproof exterior for all season riding - Weight: 91 g (3.2 oz) - Lifetime PDWarranty The Red Planet: - Five red LEDs - Steady, blinking and dance modes - Stayputnik mount included - Runs on 2xAAA batteries (included) - Weatherproof exterior for all season riding - Weight: 45 g (1.6 oz) - Lifetime PDWarranty
Portland Design Works Pathfinder
$43.95
The Pathfinder USB Headlight from Portland Design Works is unlike any other bike light on the market, incorporating technologies to help you see and be seen while riding, day or night. The Vertical Cutoff Beam is designed to focus the 200 lumen main beam onto the road in front of you and prevents lost lumens that can blind oncoming traffic. For daytime riding, the Daytime Running Flash is bright enough to make you seen even on the brightest days. The Battery Meter lets you know exactly how much battery life you have left before needing to recharge with the included USB cord. The Pathfinder includes a powerful lithium-ion battery and a darkness destroying CREE LED bulb. It provides superior luminous guidance for up to 25 hours of ride time. The rugged construction is weatherproof and strong enough to handle the abuse of an urban commute. - 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Lumens and burn times certified by Labsphere Illumia Light Measurement System to FL1 standard - Vertical Cutoff Beam to focus 200 lumens on the road ahead - CREE LED - Battery Meter for Li-ion battery - Micro USB charging cord included; 3 hour charging cycle - Weatherproof exterior for all season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Includes UV-proof quick on/off handlebar mount - Weight: 57 g (2 oz)
Portland Design Works Spaceship 3 Headlight/Radbot 500 Taillight Set
$43.95
Portland Design Works' Spaceship 3 Headlight/Radbot 500 Taillight Set offers bright LED lights, front and rear, for super nighttime visibility. The Spaceship 3 headlight focuses three brilliant LEDs through a precision lens, illuminating your course ahead. Powered by 2xAA batteries, the Spaceship 3 includes both steady and flashing modes for up to 100 hours of run time. Includes the Mission Control 2.0 mount. The RADBOT 500 is equipped with a blazing 0.5 watt LED and a large precision reflector to provide visibility to your backside. Powered by 2xAAA batteries, the RADBOT has three modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time. It also features an on/off switch that must be depressed for 1.5 seconds to turn the light on and off. This helps prevent the RADBOT from being accidentally turned on when you're transporting it in your pocket or bag off the bike. Spaceship 3: - Three bright white LEDs - Runs on 2xAA batteries (included) for up to 100 hours of run time - 2 Modes: Steady and Flashing   - Weatherproof exterior for all season riding - Includes Mission Control 2.0 mount  - Weight: 91 g (3.2 oz) - Lifetime PDWarranty Radbot 500: - 0.5 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty
Problem Solvers Braze-on Light Mount
$19.99
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
Quad Lock iPhone Bike Mounting Kit
$69.95
The lightest, strongest and most secure iPhone mounting system on the market! -Kit is supplied with everything you need to mount to your bike -Composite case construction - tough polycarbonate core with durable TPU outer -Can be mounted on most bars and tubes ranging from 25 to 40mm diameter -Larger tubes diameters can also be used but may require longer zip ties (not included) -Clear "Poncho" cover helps keep phone dry and dirt-free
Robert Axle Project Trainer Thru Axle
$54.00 - $61.95
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
SRAM RED eTap Blips
$140.95 - $141.95
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
SRAM RED eTap Bar End Clic Shift Buttons
$144.45 - $156.45
- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter
SRAM RED AXS Quarq Road Powermeter DUB
$1,426.45 - $1,436.95
The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included
SRAM RED 1 AXS Quarq Road Power Meter DUB
$1,431.45
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
Shimano SH-ME3 Shoes
$120.00
Versatile off-road shoe designed to perform and function flawlessly on and off the bike - TORBAL midsole allows natural rider "flow" motion while riding - Low-profile reverse buckle and cross X-strap secure foot - Lightweight rubber outsole offers all-conditions traction - Glass fiber reinforced midsole for power transfer
Tern RidePocket
$16.95
The RidePocket is a compact handlepost bag built to hold everything you keep in your pockets: wallet, cellphone, and keys. With the RidePocket you can cycle comfortably—no more sitting on your house keys. Since it’s intuitively organized, your essentials are right where you need them. It includes two zip pockets and an outer mesh pocket. The RidePocket includes a weatherproof rain cover, so you can push on through torrential downpours, and it’s built from durable 420 denier nylon. It mounts securely, but comes off easily, so you can bring it in with you when you lock your bike outside. - Designed to hold all your essentials (wallet, phone, keys, and more) so you can ride unencumbered - Intuitively organized for convenience - Mounts on the handlepost for accessibility - Fits all Tern bikes, and most folding bikes - Fits phones of all sizes - Includes handy rain cover - 1L volume capacity
Topeak Tail Lux
$19.95
Topeak's Tail Lux helmet light mounts to any helmet or Topeak bag or rack with ease. Its constant and blinking modes ensure you'll be seen. A nice supplement to your regular light set, the Tail Lux is a convenient way to add extra safety to your commute. Plus, the coin battery is included.
Topeak Aero Wedge Pack (Small w/Strap)
$20.95
Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.
Topeak BarXtender
$20.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz