Skip to main content

Filter By:

Cables

Various Manufacturers Alloy Headset-mount front cable hanger (housing stop) for traditional cantilevers and centerpull caliper brakes SILVER
$9.95
Headset-mount front cable hanger (housing stop) for tradtitional cantilevers and centerpull caliper brakes. Mounts on 1" threaded fork steerers. Can also be easily modified to fit 1" threadless fork steerers by filing off the little tab in the hole. Includes adjusting barrel. ALLOY - SILVER
Various Manufacturers Headset-mount front cable hanger (housing stop) for traditional cantilevers and centerpull caliper brakes
$5.95
Current model is a rather cheap stamped steel item. It's all we could get. 3mm thick. Headset-mount front cable hanger (housing stop) for tradtitional cantilevers and centerpull caliper brakes. Mounts on 1" threaded fork steerers. Can also be easily modified to fit 1" threadless fork steerers by filing off the little tab in the hole. Includes adjusting barrel. Steel, silver OR black.
Various Manufacturers Inner Cable for Sturmey-Archer 3-Speed Hub 3000mm
$7.95
Inner wire only. 3000mm Tandem length can be cut to fit any bike. Does not include housing or any fittings.
Various Manufacturers Transverse (Straddle) Cable Single-Ended 1.8 x 380mm
$2.95
For Cantilever Brakes The standard. Single ended. Allows mechanical leverage to be setup as needed.
Origin8 Double Housing Stop 1 1/8
$9.95
These allow the installation of any type of handlebar shifters on frames that don't have housing stops or braze-ons on the down tube. The 1 1/8" (28.6 mm) diameter fits the down tubes of most older steel frames. Can also be used as rear brake housing stop on top tube. If you want to use this with Shimano STI shifters, you will also need an inline cable adjuster (see related items below) to allow you to make fine adjustments to the front derailer indexing.
Origin8 Single Housing Stop (PAIR) 1 1/8
$13.95
The 1 1/8" (28.6 mm) diameter fits the down tubes of most older steel frames. Can also be used as rear brake housing stop on top tube. Hinged clamp for easy installation on round frame tubes Set of two. Black alloy.
Origin8 Single Housing Stop 1 1/8
$7.95
The 1 1/8" (28.6 mm) diameter fits the down tubes of most older steel frames. Can also be used as rear brake housing stop on top tube.
Jagwire Hyper Stainless Shift Cable & Housing Set
$21.95
Complete set of front and rear inner cables, ferrules, crimps and black lined housing. These are very high quality stainless steel cables, Die drawn to smooth out their surface for reduced friction. Before you install cables, please check out our cable page
Jagwire Universal Brake Cable and Housing Set
$21.95
One bike's worth, universal cables and housing. Ferrules and crimp-on end caps incuded. Stainless Slick (die-drawn for smoothness) inner cables Teflon lined housing. Double ended cables fit road or mountain type brake levers.
Giant Stainless Slick Brake Cable, Double-ended
$4.95
-Smooth surface and low friction -Pre-stretching reduces elongation for best responsiveness -Stainless: permanent rust-free performance -Double ended for use with road or mountain bikes -1.5 x 1700mm
Giant Stainless Slick Inner Shift Cable
$4.95
These are very high quality rust proof cables. -Stainless steel slick extruded surface -1.1mm x 2100mm -Pre-stretched for precise shifting -Permanent rust free performance -Shimano & SRAM compatible -Single-ended Before you install cables, please check out our cable page
Giant Stainless Slick Tandem Brake Cable Road /Mtn
$10.95
These are very high-quality rust-proof cables. The cables are die-drawn to smooth out their surface for reduced friction. Double-ended, for Mountain/Upright or Road bike levers. 2750 mm length for tandems.
Giant Tandem Shift Cable Stainless Slick 3100mm Universal
$7.95
Double-ended. Fits Shimano/Sram or Campagnolo shifters. Tandem Length, 3000mm long. These are very high quality rust proof cables, Die drawn to smooth out their surface for reduced friction. Before you install cables, please check out our cable page
Generic Transverse (Straddle) Cable 2-ended 110mm
$3.95
These short (110mm) straddle cables fit older center-pull road brakes (Weinmann & Dia-Compe) and some U-brakes.
Clarks Brake Cable and Housing Kit
$19.95
- Complete kit for one bicycle - 5mm compressionless housing - 1.5mm stainless steel inner wires - Includes nylon ferrules, cable tips & donuts - Cable length: front 2000mm / rear 2100mm - Housing length: 1000mm - Double ended cables fit road or mountain type brake levers.
Clarks Shift Cable and Housing Kit
$19.95
- Complete kit for one bicycle - 4mm Index housing - 1.1mm stainless steel inner wires - Includes nylon ferrules, cable tips & donuts - Cable length: front 2275mm / rear 2500mm - SRAM & Shimano compatible
Origin8 Brake Cable Hanger (1-inch)
$12.95
Origin-8's Fork Cable Hanger provides a clean and functional way to route the front brake cable on your ride. It provides a 34mm cable stop drop down and a barrel adjuster so that you can adjust your stopping to perfection. • Fits 1-inch threadless or threaded** fork steer tubes • Includes barrel adjuster • 34mm cable stop drop down • Anodized silver finish ** The clamp section is 10mm thick, so you'll need at least that much space on the steerer tube.
Page 1 of 1