Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Tektro RL520 Drop Bar Brake Levers for V-Type Linear-Pull Brakes
$32.95
These have longer cable travel than other drop-bar levers,
and are particularly designed for use with
direct-pull cantilever brakes, such as Shimano V-Brakes ®.

Ergo style levers. Silver with black hoods. Does not come with cables or housing.

Tektro Tektro Premium Yoke Silver for Cantilever or Centerpull Brakes
$6.95
These premium quality cable yokes are a great choice for traditional cantilever and centerpull caliper brakes. The two small grub screws let you secure the transverse cable so it won't slide. This helps keep the brakes centered. Sold individually. Includes:
  • Braided transverse cable
  • 2.5 mm Allen wrench
  • Cable end crimp
Tange American-style One Piece Bottom Bracket set 24 tpi threading
$15.95
Bottom bracket unit in a frame made for the old-style "Ashtabula" one-piece cranks. The 24 TPI threading fits most one-piece cranks. (If your bike is a Schwinn or Mongoose, and you are using the original crank, you probably need the 28 tpi version.) If you are replacing the original crank even on a Schwinn or Mongoose, this 24 tpi set is the way to go. The old 28 tpi threading is an endangered species, but the frame will accept either type with no problem. NOTE: Some department store kids bikes are using a smaller diameter one piece bottom bracket that is not the same as this.
Tange Levins ISO Headset
$26.95
Excellent value in a steel headset, using 5/32" ball bearings. Stack height: 33.4 mm Weight: 149 grams 26.4mm Crown Race
Tange Levins JIS Headset (27.0mm Crown Race)
$26.95
Excellent value in a steel headset, using 5/32" ball bearings. Stack height: 33.4 mm Weight: 149 grams NOTE: This set is not "full JIS". The cups are 30.2mm - not 30.0mm. These are probably fine for low-end bikes with 30.0mm headtube I.D. The chances of damaging the headtube are very slim. 27.0mm Crown Race 30.2mm cups
T.A. Specialites Alize 130 BCD Road Chainring (Middle/Inner Position)
$54.00
These chainrings are for the inner position of a road double, or the middle position of a road triple crankset. TA Chainrings are made in France, very high quality. These middle/inner rings have ramps and pins. High-polish silver finish. 5,6,7,8,9,10 speed compatible. Mixing with 10 speed chainrings of other brands is not recommended. Prices vary
T.A. Specialites Alize 130 BCD Road Chainring (Outer Position)
$63.00 - $69.00
TA Chainrings are made in France, very high quality, with shift-assist pins. 5,6,7,8,9,10 speed compatible. Mixing with 10 speed chainrings of other brands is not recommended. High-polish silver finish. Note: Outer TA chainrings include a "chain drop" pin that prevents the chain from dropping down between chainrings. The pin is in a plastic bag stapled to the packaging.
T.A. Specialites Zelito 74mm BCD Chainrings (Inner for Triple)
$38.00
T.A. chainrings are super-high quality, premium rings in Zircal 7075 aluminum. They have machined teeth, and a mirror-like finish. Sizes: 24t, 26t, 28t 74 mm inner position chainrings fit most 5-bolt triple cranksets that have either 130mm or 110mm outer and middle rings.
T.A. Specialites Zephyr 110 BCD Outer Chainrings
$60.00 - $63.00
TA Chainrings are made in France, very high quality, with shift-assist pins. Fits OUTER position of a single, double or triple crankset. High-polish silver finish. Note: Outer TA chainrings include a "chain drop" pin that prevents the chain from dropping down between chainrings. The pin is in a plastic bag stapled to the packaging.
T.A. Specialites Zephyr 110 BCD Road Chainring (Middle/Inner Position)
$44.00 - $50.00
These chainrings are for the inner position of a road double, or the middle position of a road triple crankset. TA Chainrings are made in France, very high quality. These middle/inner rings have ramps and pins. High-polish silver finish. 5,6,7,8,9,10 speed compatible. Mixing with 10 speed chainrings of other brands is not recommended. Prices vary
Surly Singlespeed MTB Hub- rear 135mm Black
$25.00 $59.95 58% Off

ONLY ONE IN STOCK - NO RETURNS

Rear Black, 32 holes. Threaded for single freewheel on both sides. This hub comes with 135 mm spacing, to fit most mountain frames.
Surly Track Dropouts
$27.95
CNC Cr-Mo for frame building ONLY.
Sunlite Alloy/Steel Handlebar Stem 21.15 mm for Older American Bikes
$24.95
These were unavailable for a long time, but we found a new stash! Ideal upgrade for your Schwinn Varsity or other older bike that needs the 21.15 quill size. Aluminum upper section to keep the weight down, with strong steel quill. Forward Exension (reach): 3" Clamp fits ISO standard 1" (25.4 mm) handlebar center.
Sunlite Bottom Bracket w/Sealed Bearings Square Tapered 68 x 103mm
$26.95
The 68 x 103mm size is commonly used for Track/Fixed Gear bikes. Threading: Standard English (1.37" x 24t) Taper: JIS Forged steel body Alloy cups Chromoly spindle
Sunlite Classic Bow Style Rubber Pedals 1/2
$24.95
• Rubber platform increases comfort and grip • With reflectors
Sunlite Schwinn-type grips
$6.95
These soft krayton rubber grips are very similar to those used for many years on classic Schwinns. Available in black and white.
Sunlite Steel 1-inch–21.1mm Threaded Headset
$7.95
This headset will fit old American bikes like Schwinn, Huffy and Murray. - Inside diameter is 21.1mm - Steel cups - Steel retainer bearings - Steerer Dia: 25.4mm - Cup Dia: 32.5mm
Sunlite Stem Raiser For 1
$19.95
Note: Stems with a 1" diameter quill fit 1-1/8"(O.D.) forks. Made of cro-moly steel. A stem raiser fits into the steering column in place of your present stem, and secures with a wedge bolt in the normal manner. The upper part of the stem raiser sticks out above the steerer, and is bulged out so that you can insert your original stem. The bottom of the original stem winds up a bit above the top of the headset, so you gain several inches of height. This size fits bikes with "oversized" stems. Actual outside diameter of the riser is 1" (25.4) mm. This size was used on some mountain bikes from the 1990s and early 2000s, but it is not as common as the 1 1/8" threadless type used on most newere bikes. Note, you may need to install longer brake and/or shift cables. You'll need a long 6mm allen wrench to tighten the bolt in the stem riser.
SunRace 13-25 Thread-on 7-speed Freewheel
$25.95
13-15-17-19-21-23-25 Teeth Close-ratio 7-speed freewheel, excellent choice for those who mainly ride in gentle or flat terrain, or for rolling terrain with a triple in front. It is generally good practice to replace the chain when you replace the freewheel. We recommend the SRAM PC-870 chain for use with this freewheel. This freewheel is compatible with all Shimano-type 7-speed drivetrains. This freewheel uses the Park FR-1 extractor. Are you sure you need a thread-on freewheel, not a cassette? Click here to find out which type your bike needs!
SunRace 5-speed 14-28t Thread-on Freewheel
$16.95
14 - 16 - 20 - 24 - 28 Teeth Decent quality. Affordable. Made in Taiwan. It is generally good practice to replace the chain when you replace the freewheel.
SunRace Rear Derailleur Adaptor Claw
$4.95
Adaptor claw to attach a standard derailer to a rear dropout that does not have a built-in Derailleur mount. The bolt and its special shoulder nut fit in the back of the axle slot. When normally installed, the left end of the wheel's axle will wind up near the middle of its axle slot. This is normal. There are millions of bikes on the road using this system.
SunRace Top Mount Friction
$11.95
Top Mount Shift levers Sold as Pairs: Basic "Thumb" Shifters. Friction setting only. Will work with any multi-speed freewheel or cassette.
Sun CR-18 27
$34.95
Sun CR-18 Touring rim. One of our favorite rims. Polished silver finish. Aluminum. Presta valve drilling. 36 hole
Sun CR-18 406 20
$29.95
Sun CR-18 406 20" rim for folding bikes and recumbents. Satin silver finish.
Sun CR-18 559 26
$34.95
Classic All-Purpose Rim Silver
Sun CR-18 590 mm (26 x 1 3/8) Rim
$26.95 - $39.95
Sun CR-18 Rim ISO 590 (26 x 1 3/8 E.A.3, 650A) This excellent aluminum rim is a great upgrade for your older three-speed bike or for a smaller size road bike. This is, by far, the finest rim that has ever existed in this size. Stronger and lighter than the original steel rims, it will also make a considerable improvement in braking performance. 440 grams 22.5 mm width ERD 578
Sun CR-18 700C 622 Road Rim Silver
$34.95
Sun CR-18 700C General Purpose Touring Rim. Satin Silver finish. Available in 32 or 36 hole. Non-machined sidewalls. Drilled for presta valve. Outer Width: 22.5 mm Internal Rim Width: 18 mm
Sun Rhyno Lite 700C 622 Touring Rim Silver
$39.95
Sun Rhyno Lite 700C Heavy-Duty Touring Rim. Satin Silver. Non-machined sidewalls. Drillings: 32 hole OUT OF STOCK. 36 hole Presta valve hole Outer width: 27.5mm Inside width: 22.0mm
Sun Rhyno Lite HD 559 26
$39.95
A great rim for heavy-duty applications. Silver. 32 and 36 Hole. Schrader valve.
Sugino 110mm BCD Chainring No Ramps Silver
$39.95 - $64.95
110mm BCD for full size MTB and Road Compact cranks. Compatible up to 9 speed systems. Silver Alloy** No Ramps or pins. Made in Japan. **Note: There is a running change on the finish on these rings. The new finish is a matte silver. We are still receiving product in both the new finish and the old polished silver finish. If you order multiple rings, we'll try our best to match the finishes, but can't guarantee it. Prices vary.