Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

 

 Miscellaneous item C
$0.01
The item is for in-house use only.
 Miscellaneous item B
$0.50
The item is for in-house use only.
Action 3 Speed/Touring-Type Handlebar Grips (Pair) Black
$7.95
These rubber grips are not as soft as the VAR (no longer available) grips, but they're a lot nicer than those cheap "plastic" grips.
Action Side-Pull Brake Caliper 74 to 91mm Reach
$12.95
Click here to determine the correct brake reach for your bike. If you don't like the look of the Odyssey 1999 or Tektro 984 brakes, these Action calipers have a much more traditional look for your old Raleigh three-speed. NOTE: These brakes fit some, but not all, 3-spd bikes with 26x1-3/8 tires. Be sure to use the above link and measure the actual reach on your brakes. Comes with one brake and both front and rear center bolts, complete with hardware.
  • Material: Aluminum
  • Standard nut mount
  • Caliper only. Cable and lever not included.
  • Action Bottom Bracket Cup Set (French Thread)
    $19.95
    Finally! An affordable bottom bracket cup set for your old French bike! Cups, lock ring and retainer bearings, 35x1mm threads, Dual Right hand thread. Waterproof
    Action Road Double Crankset 52t x 42t x 170mm
    $59.95
    Reasonably priced double crankset with classic look. Alloy arms with alloy chrainrings. Uses standard square tapered bottom bracket spindle, 107mm or 110mm. Usually 107mm for road frames and 110mm for MTB/Touring frames. 170mm crank arm length.
    Black Ops Single Freewheel 3/32
    $25.95
    -Cold forged chromoly construction -8 splines for removal -Oversize 3-pawl design -Heavy duty use freewheel These have standard 1.37" x 24 tpi threads. 3/32" tooth width will accept 3/32" or 1/8" chain.
    Brooks Saddle Cover - Black
    $10.95
    Now available in medium or large Protects your Brooks saddle from the elements.
    Secures with drawstring. Made of rubberized nylon. Medium: Fits B17, Team Pro, Swift. Large: Fits B66, B67, B72.
    Brooks Cambium Slender Leather Bicycle Handlebar Grips
    $25.00 $89.95 72% Off
    LIMITED STOCK. No returns (unless defective) The design of Brooks Cambium Slender Grips incorporates an aluminium shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The tape is made from organic cotton and rubber and is held in place by aluminium clamps which can be removed to replace the tape if necessary. Length: Left: 130mm, Right: 130mm -Slate -Natural
    Brooks Slender Leather Bicycle Handlebar Grips Royal Blue
    $25.00 $79.95 69% Off
    ONLY ONE PAIR. No returns (unless defective) Brooks Slender Leather Grips feature vegetable tanned leather and cork tape, and are designed to offer an alternative performance option for the user, while maintaining the standard for sustainability set by the Ring Grips, allowing the user to replace worn parts if necessary. The design incorporates an aluminium shell around which the bar tape is wrapped in the traditional manner. Length: 130mm
    Brooks B135 Saddle Black (DISPLAY MODEL)
    $80.00 $180.00 56% Off

    DISPLAY MODEL. NO BOX, NO RETURNS

    The B135 is a heavy-duty sprung saddle designed to cope with the poor road conditions in the third world. The saddle shape is the same as the B67. Uses proprietary double-rail saddle clamp (NOT INCLUDED).
    Cinelli Cork Tape
    $15.95
    A Best Seller! Classic cork tape set does one full handlebar. Includes plastic end plugs.
    • Black
    • White
    • Red
    • Blue
    • Yellow
    • Celeste
    • Tan
    • Orange
    • White
    • Pink
    Clarks Brake Cable and Housing Kit
    $17.95
    - Complete kit for one bicycle - 5mm compressionless housing - 1.5mm stainless steel inner wires - Includes nylon ferrules, cable tips & donuts - Cable length: front 2000mm / rear 2100mm - Housing length: 1000mm - Double ended cables fit road or mountain type brake levers.
    Clarks Shift Cable and Housing Kit
    $17.95
    - Complete kit for one bicycle - 4mm Index housing - 1.1mm stainless steel inner wires - Includes nylon ferrules, cable tips & donuts - Cable length: front 2275mm / rear 2500mm - Housing length: 1000mm - Double ended cables fit road or mountain type brake levers. - SRAM & Shimano compatible
    DT Swiss Competition Double Butted Spokes 2.0-1.8 (Silver)
    $1.25
    Most sizes usually in stock Standard 12mm nickel-plated brass nipples are included. The Double-Butted DT Competition is a great all-around spoke. These Swiss-made stainless steel spokes have three thicknesses: 2.0 (14 gauge) mm at the ends. 1.8 mm (15 gauge) in the middle. Not only does this save weight, but the thinner middle section gives the spoke (and the wheel greater elasticity for increased durability.) If you wish, we will calculate the length for you and send the appropriate length. You must tell us make and model of hub, make and model of rim; number of spokes to build wheel. You can type that information into the "Comments/Information" box that you will find on page 3 of the secure shopping cart process. Please include as much info as possible - hub brand, model, model number, etc. We will do the best we can to calculate the length correctly, but cannot guarantee perfection. Need wheelbuilding instructions? Click here! See Related Items (below) for Wheel Build Labor if you would like us to build you a wheel.
    DT Swiss Competition Double Butted 2.0-1.8 - (Black)
    $1.73
    Most sizes usually in stock 12mm black brass nipples included. The Double-Butted DT Competition is a great all-around spoke. These Swiss-made stainless steel spokes have three thicknesses: 2.0 (14 gauge) mm at the ends. 1.8 mm (15 gauge) in the middle. Not only does this save weight, but the thinner middle section gives the spoke (and the wheel greater elasticity for increased durability.) If you wish, we will calculate the length for you and send the appropriate length. You must tell us make and model of hub, make and model of rim; number of spokes to build wheel. You can type that information into the "Comments/Information" box that you will find on page 3 of the secure shopping cart process. Please include as much info as possible - hub brand, model, model number, etc. We will do the best we can to calculate the length correctly, but cannot guarantee perfection. Need wheelbuilding instructions? Click here! See Related Items (below) for Wheel Build Labor if you would like us to build you a wheel.
    Dimension Genuine Cork Grips
    $14.95
    These grips are genUine cork. For flat/riser/upright handlebars. 'Nuff said! Inside diameter: 22.2mm Length: 125mm
    Dimension 14-34t Thread-on 6-speed Freewheel
    $19.95
    14-16-18-21-24-34Teeth "Alpine" design, with closer spacing between most of the sprockets for efficient cruising, and the huge 34-tooth "bail-out" gear for the tough hills. This setup looks funny on paper, but works great in practice! It is generally good practice to replace the chain when you replace the freewheel. We recommend the SRAM PC-870 chain for use with this freewheel. This freewheel will index with any Shimano-type 6-speed shifter, but does require a wide-range (touring/mountain) rear derailer. This freewheel uses the Park FR-1 extractor.
    Fibrax Raincheater Vintage Brake Pads f/Steel Rims
    $9.95
    Made in the UK. Vintage style pads for old Three-Speed and Ten-Speed bikes with side-pull or center-pull brake calipers. Threaded stud. 36mm Wide Blocks
    Fibrax SH70 Rod Brake Shoe (PAIR)
    $9.95
    Fibrax Replacement Pads for Rod Brakes. These have angled studs to fit the rod-operated "roller-lever" brakes used on classic 28 inch wheel English roadsters, and similar bikes. 45 mm long. Made in The UK!
    Generic Miscellaneous item A
    $0.01
    The item is for in-house use only.
    Generic 9.5 mm Crank Cotter Pin (English Size) Each
    $2.95
    9.5 mm (3/8") Crank Cotters, English/Raleigh size, also fits Asian Bikes. For installation instructions, see our Cottered Cranks Article It is normal to have to do some filing on the flat for a good fit. Sold individually, but it is generally a good idea to replace both at once.
    Generic Transverse (Straddle) Cable 2-ended 110mm
    $3.95
    These short (110mm) straddle cables fit older center-pull road brakes (Weinmann & Dia-Compe) and some U-brakes.
    Giant Stainless Slick Brake Cable, Double-ended
    $4.95
    -Smooth surface and low friction -Pre-stretching reduces elongation for best responsiveness -Stainless: permanent rust-free performance -Double ended for use with road or mountain bikes -1.5 x 1700mm
    Giant Stainless Slick Inner Shift Cable
    $4.95
    These are very high quality rust proof cables. -Stainless steel slick extruded surface -1.1mm x 2100mm -Pre-stretched for precise shifting -Permanent rust free performance -Shimano & SRAM compatible -Single-ended Before you install cables, please check out our cable page
    Giant Tandem Shift Cable Stainless Slick 3100mm Universal
    $7.95
    Double-ended. Fits Shimano/Sram or Campagnolo shifters. Tandem Length, 3000mm long. These are very high quality rust proof cables, Die drawn to smooth out their surface for reduced friction. Before you install cables, please check out our cable page
    Harris Custom Century 12 12-30 9-speed Cassette
    $99.95
    12 - 13 - 15 - 17 - 19 - 21 - 24 - 27 - 30 Teeth 304 grams. This is a Harris Cyclery exclusive, designed by Sheldon Brown, based on a Shimano CS-6500 Ultegra cassette. This is intended to provide nice low gears and still preserve reasonably close spacing in the cruising range. It is generally good practice to replace the chain when you replace the cassette. We recommend the SRAM PC-951 chain for use with this cassette. This cassette will index with any Shimano-type 9-speed shifter and any rear derailer. This cassette will fit any Shimano 8/9/10-speed hub.
    Harris Custom Century Special 13-30 9-speed Cassette
    $105.95
    13 - 14 - 15 - 17 - 19 - 21 - 24 - 27 - 30t 305 grams. This is a Harris Cyclery exclusive, designed by Sheldon Brown, based on a Shimano CS-6500 Ultegra cassette. This is intended to provide nice low gears and still preserve reasonably close spacing in the cruising range, without wasting gears by devoting space to ludicrously high gears. This is intended to be a good match for bikes with traditional "full sized" chainrings. It is generally good practice to replace the chain when you replace the cassette. We recommend the SRAM PC-951 chain for use with this cassette. This cassette will index with any Shimano-type 9-speed shifter and any rear derailer. This cassette will fit any Shimano 8/9/10-speed hub.
    IRD Alpina-d Compact Road Triple Front Derailleur
    $49.95 - $55.95
    IRD Alpina-d Compact Road Triple Front Derailleur Designed specifically for compact triple cranks. Available for 3 different sized seat tubes with clamp mount, and for braze-on mount. All variations use the same basic braze-on Derailleur. Clamp on versions come with an appropriate clamp adapter installed. Current 28.6mm clamps are BLACK
    Jagwire Huret Type Inner Shift Cable
    $3.95
    These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. The Huret "disc" end will also work with vintage Suntour X-Press MTB shifters.
    Page 1 of 9 Next page