Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

 

Zéfal Christophe Vintage Leather Toe Straps (Pair)
$12.95
Leather Toe Straps Classic look and design. Length: 370mm
Wheels Mfg Bearing balls 1/4 inch grade 25, bag of 25
$8.95
For Bottom Brackets & Rear Hubs. Most bottom brackets use 11 1/4" balls each side. Most rear hubs use 9 1/4" balls each side. Grade 25 is the highest readily available commercial grade, as used in top of the line Campagnolo Record and Shimano Dura-Ace parts.
Wheels Mfg Bearing balls 3/16 inch grade 25, bag of 25
$8.95
For most Front Hubs & some Headsets. Grade 25 is the highest readily available commercial grade, as used in top of the line Campagnolo Record and Shimano Dura-Ace parts. Most front hubs use 10 3/16" balls each side.
Wheels Mfg Bearing balls 5/32 inch grade 25, tub of 75
$10.95
For Headsets & Pedals. Grade 25 is the highest readily available commercial grade, as used in top of the line Campagnolo Record and Shimano Dura-Ace parts. Fits Brompton headset.
Wheels Mfg Bearing balls 7/32 inch grade 25, bag of 25
$9.95
The 7/32" size fits upper level Campagnolo front hubs Grade 25 is the highest readily available commercial grade, as used in top of the line Campagnolo Record and Shimano Dura-Ace parts.
Velox Rim Tape (Fond de Jante) Sold each
$4.95
Velox cloth rim tape is the standard of the industry, light and reliable. Comes in 2 widths, 10 mm, 16 mm. Most rims use the 16 mm size. 10mm is for very narrow rims like the Sun M13 and Weinmann LP80. One roll is enough for one wheel, Get 2 rolls for a wheelset.
Velox Velox Handlebar Plugs Black -Pair
$7.95
Reusable, screw-in type plugs. Made of rubber.
Velocity A23 584 mm (650B) Rim 36 holes Silver
$69.95
With a wider footprint, the A23 allows for a more aerodynamic rim/tire combination. The tire profile mimics the characteristics of a tubular, gaining increased control and lower rolling resistance without the inconvenience of tubular glue or the dangers of irreparable roadside mechanicals. Light in weight and tubeless-compatible, the A23 is an extremely versatile rim with a classic look. The A23 O/C rim is the off center version of the popular A23. The offset is 3.5mm, and the off center design allows for dramatically improved spoke tension on a dished rear wheel. Tight tolerances require the use of a low profile rim tape like Velotape or Stan's Tubeless tape to avoid tire installation issues, even when using clincher tires. Veloplugs are not recommended on A23 or A23 OC rims. Specs: Rim Size: 650B Width: 23mm Height: 19.5mm Tire Interface: Clincher / Tubeless Valve: Presta 32 - 40mm Bead Seat Diameter (BSD): 584 Effective Rim Diameter (ERD): 560 Weight: 442g Sidewalls: Non-machined
Velocity A23 Polished 584 mm (650B) Rim
$109.00
With a wider footprint, the A23 allows for a more aerodynamic rim/tire combination. The tire profile mimics the characteristics of a tubular, gaining increased control and lower rolling resistance without the inconvenience of tubular glue or the dangers of irreparable roadside mechanicals. The polished finish gives a nice classic look suitable to classic as well as more recent bikes. Light in weight and tubeless-compatible, the A23 is an extremely versatile rim with a classic look. The A23 O/C rim is the off center version of the popular A23. The offset is 3.5mm, and the off center design allows for dramatically improved spoke tension on a dished rear wheel. Tight tolerances require the use of a low profile rim tape like Velotape or Stan's Tubeless tape to avoid tire installation issues, even when using clincher tires. Veloplugs are not recommended on A23 or A23 OC rims. Specs: Rim Size: 650B Width: 23mm Height: 19.5mm Tire Interface: Clincher / Tubeless Valve: Presta 32 - 40mm Bead Seat Diameter (BSD): 584 Effective Rim Diameter (ERD): 560 Weight: 442g Sidewalls: Non-machined
Various Manufacturers 4.5mm Spacer for 7 speed Cassettes
$5.95
4.5 mm spacer to fit a 7-speed cassette onto a hub made for 8-, 9-, or 10-speed cassettes. If your cassette has bolts holding the sprockets together, you will need to remove the bolts. They are not necesssary, only intended as a convenience for rapid cassette swaps.
Various Manufacturers Alloy Headset-mount front cable hanger (housing stop) for traditional cantilevers and centerpull caliper brakes SILVER
$9.95
Headset-mount front cable hanger (housing stop) for tradtitional cantilevers and centerpull caliper brakes. Mounts on 1" threaded fork steerers. Can also be easily modified to fit 1" threadless fork steerers by filing off the little tab in the hole. Includes adjusting barrel. ALLOY - SILVER
Various Manufacturers Headset-mount front cable hanger (housing stop) for traditional cantilevers and centerpull caliper brakes
$5.95
Current model is a rather cheap stamped steel item. It's all we could get. 3mm thick. Headset-mount front cable hanger (housing stop) for tradtitional cantilevers and centerpull caliper brakes. Mounts on 1" threaded fork steerers. Can also be easily modified to fit 1" threadless fork steerers by filing off the little tab in the hole. Includes adjusting barrel. Steel, silver OR black.
Various Manufacturers Laprade Type Seatpost Alloy 350mm Length
$19.95
Kalloy (or similar Laprade type) These are basic, good quality seatposts with a "Laprade type" one bolt clamp. We usually have these in the 350 mm length in a wide range of sizes. This is as good a seatpost as most people need. Color: Silver (Actual item might have a brand logo)
Various Manufacturers Saddle Clamp for 7/8
$6.95
For seatposts that do not have a clamp on top, 7/8" inside diameter . For standard saddles. Does not fit the older Brooks 'double rail' saddles like the B66.
Various Manufacturers Single stack Chainring Bolt Set (5)
$9.95
It looks really goofy to ride a fixed gear with a useless extra chainwheel on your crank. These track-style stack bolts are the right length to hold a single chainwheel to your crank. They fit all modern cranks.
Various Manufacturers Stainless Socket Cap Screw 4 mm x 20 mm
$0.75
Use this as your B tension screw on Deore rear derailleur, enabling use of 11 (or 12t)-36t 10 speed cassette!
Various Manufacturers Transverse (Straddle) Cable Single-Ended 1.8 x 380mm
$2.95
For Cantilever Brakes The standard. Single ended. Allows mechanical leverage to be setup as needed.
TruVativ Bottom Bracket Conversion American-to-Euro Adapter
$19.95
This very nicely made bushing set allows you to mount a modern threaded cartridge bottom bracket unit in a frame made for the old-style "Ashtabula" one-piece cranks. This saves weight, improves shifting, and allows the use of modern clipless pedals. Be the first kid on your block to put a Dura-Ace crankset into your Schwinn Varsity! Installation Note:Press in right side (left threaded) bushing first. Then draw in left side bushing by gradually tightening the allen head bolts. The bolts go through the left side and screw into the right side adaptor.
Tressostar Tressoplast cloth bar tape- 1 Roll
$5.95
Made in France, this is the real thing. You'll need 2 (two) rolls to cover 1 handlebar. One roll does each side.
Tektro Adjustable Brake Levers
$19.95
These have an adjustment for mechanical advantage, so they work with _all_ types of brakes, including direct-pull ("V-type"), center-pull cantilevers, all types of calipers and drum brakes. 22.2mm clamp fits MTB/Flat/Upright bars
Tektro R539 47-57mm Reach Brake Caliper (Exposed-Nut) Silver
$39.95
Click here to determine the correct brake reach for your bike.
Older, exposed-nut version is great for 27" frame and fork to 700c wheel conversions. These are a super value, very high quality with re-fillable cartridge type brake shoes. Overall bolt length: 50 mm (Front)
Tektro R539 47-57mm Reach Dual-Pivot Brake Caliper (Recessed Nut)
$39.95
Click here to determine the correct brake reach for your bike. These are a super value, very high quality with re-fillable cartridge type brake shoes. Polished aluminum finish. Aluminum barrel adjusters, and cam type quick-release.
Tektro R540 39 - 51mm Reach Dual-Pivot Brake Caliper (Recessed Nut)
$38.95
Click here to determine the correct brake reach for your bike. These are a super value, very high quality with re-fillable cartridge type brake shoes. These calipers have a polished aluminum finish. Aluminum barrel adjusters, and cam type quick-release.
Tektro R559 55 - 73mm Reach Brake Caliper. (Recessed Nut)
$39.95
Click here to determine the correct brake reach for your bike. Dual pivot with high clearance for fatter road tires up to 37mm wide. Long travel quick release provides wide opening for tire removal. Works well with all traditional (short travel) brake levers (everything except "V type levers.") Beautifully finished forged aluminum arms Light aluminum quick release mechanism Long travel quick release provides wide opening for tire removal. Refillable brake shoes with spherical washers for angle adjustment. These are an excellent upgrade for older frames that require long reach calipers.
Tektro R559 73mm Reach Brake Caliper (Exposed-Nut)
$39.95
Click here to determine the correct brake reach for your bike. These are a super value, very high quality with re-fillable cartridge type brake shoes. Polished aluminum finish. Aluminum barrel adjusters and cam type quick-release.
Tektro RL520 Drop Bar Brake Levers for V-Type Linear-Pull Brakes
$32.95
These have longer cable travel than other drop-bar levers,
and are particularly designed for use with
direct-pull cantilever brakes, such as Shimano V-Brakes ®.

Ergo style levers. Silver with black hoods. Does not come with cables or housing.

Tektro Tektro Premium Yoke Silver for Cantilever or Centerpull Brakes
$6.95
These premium quality cable yokes are a great choice for traditional cantilever and centerpull caliper brakes. The two small grub screws let you secure the transverse cable so it won't slide. This helps keep the brakes centered. Sold individually. Includes:
  • Braided transverse cable
  • 2.5 mm Allen wrench
  • Cable end crimp
Tange Levins ISO Headset
$28.95
Excellent value in a steel headset, using 5/32" ball bearings. Stack height: 33.4 mm Weight: 149 grams 26.4mm Crown Race
Tange Levins JIS Headset (27.0mm Crown Race)
$26.95
Excellent value in a steel headset, using 5/32" ball bearings. Stack height: 33.4 mm Weight: 149 grams NOTE: This set is not "full JIS". The cups are 30.2mm - not 30.0mm. These are probably fine for low-end bikes with 30.0mm headtube I.D. The chances of damaging the headtube are very slim. 27.0mm Crown Race 30.2mm cups
T.A. Specialites Zelito 74mm BCD Chainrings (Inner for Triple)
$38.00
T.A. chainrings are super-high quality, premium rings in Zircal 7075 aluminum. They have machined teeth, and a mirror-like finish. Sizes: 24t, 26t, 28t 74 mm inner position chainrings fit most 5-bolt triple cranksets that have either 130mm or 110mm outer and middle rings.
T.A. Specialites Zephyr 110 BCD Outer Chainrings
$60.00 - $68.00
TA Chainrings are made in France, very high quality, with shift-assist pins. Fits OUTER position of a single, double or triple crankset. High-polish silver finish. Note: Outer TA chainrings include a "chain drop" pin that prevents the chain from dropping down between chainrings. The pin is in a plastic bag stapled to the packaging.
T.A. Specialites Zephyr 110 BCD Road Chainring (Middle/Inner Position)
$44.00 - $50.00
These chainrings are for the inner position of a road double, or the middle position of a road triple crankset. TA Chainrings are made in France, very high quality. These middle/inner rings have ramps and pins. High-polish silver finish. 5,6,7,8,9,10 speed compatible. Mixing with 10 speed chainrings of other brands is not recommended. Prices vary
Surly Track Dropouts
$27.95
CNC Cr-Mo for frame building ONLY.
Sunlite 14-28 Thread-on 7-speed Freewheel
$16.95
SIS Compatible (Indexing) It is generally good practice to replace the chain when you replace the freewheel. We recommend the SRAM PC-870 chain for use with this freewheel. This freewheel is compatible with all Shimano-type 7-speed drivetrains. This freewheel uses the Park FR-1 extractor. Are you sure you need a thread-on freewheel, not a cassette? Click here to find out which type your bike needs!
Sunlite Alloy/Steel Handlebar Stem 21.15 mm for Older American Bikes
$24.95
These were unavailable for a long time, but we found a new stash! Ideal upgrade for your Schwinn Varsity or other older bike that needs the 21.15 quill size. Aluminum upper section to keep the weight down, with strong steel quill. Forward Exension (reach): 3" Clamp fits ISO standard 1" (25.4 mm) handlebar center.
Sunlite Alloy/Steel Handlebar Stem 22.2mm
$24.95
Great for converting old, non-American 10-speed bikes to upright handlebars. This stem will also fit Raleigh 3-speed bikes. Quill diameter: 22.2mm Forward Exension (reach): 3" Clamp fits ISO standard 1" (25.4 mm) handlebar center. Alloy top, steel quill.
Sunlite Bottom Bracket w/Sealed Bearings Square Tapered 68 x 103mm
$26.95
The 68 x 103mm size is commonly used for Track/Fixed Gear bikes. Threading: Standard English (1.37" x 24t) Taper: JIS Forged steel body Alloy cups Chromoly spindle
Sunlite Classic Bow Style Rubber Pedals 1/2
$24.95
• Rubber platform increases comfort and grip • With reflectors
Sunlite Schwinn-type grips
$6.95
These soft krayton rubber grips are very similar to those used for many years on classic Schwinns. Available in black and white.
Sunlite Steel 1-inch–21.1mm Threaded Headset
$7.95
This headset will fit old American bikes like Schwinn, Huffy and Murray. - Inside diameter is 21.1mm - Steel cups - Steel retainer bearings - Steerer Dia: 25.4mm - Cup Dia: 32.5mm
SunRace 13-28t Thread-on 7-speed Freewheel
$25.95
13-28 Teeth -Steel cogs with polymer spacers -Zinc finish -460 g It is generally good practice to replace the chain when you replace the freewheel. We recommend the SRAM PC-870 chain for use with this freewheel. This freewheel is compatible with all Shimano-type 7-speed drivetrains. This freewheel uses the Park FR-1 extractor. Are you sure you need a thread-on freewheel, not a cassette? Click here to find out which type your bike needs!
SunRace 13-34 Thread-on 7-speed Freewheel MegaDrive
$25.95
Model MF-M4S "Alpine" design, with closer spacing between most of the sprockets for efficient cruising, and the huge 34-tooth "bail-out" gear for the tough hills. This setup looks funny on paper, but works great in practice! It is generally good practice to replace the chain when you replace the freewheel. We recommend the SRAM PC-870 chain for use with this freewheel. (See related items below) This freewheel will index with any Shimano-type 7-speed shifter, but does require a wide-range (touring/mountain) rear derailleur. This freewheel uses the Park FR-1 extractor. (See related items) Are you sure you need a thread-on freewheel, not a cassette? Click here to find out which type your bike needs!
SunRace 5-speed 14-28t Thread-on Freewheel
$16.95
14 - 16 - 20 - 24 - 28 Teeth Decent quality. Affordable. Made in Taiwan. It is generally good practice to replace the chain when you replace the freewheel.
Sun CR-18 27
$34.95
Sun CR-18 Touring rim. One of our favorite rims. Polished silver finish. Aluminum. Presta valve drilling. 36 hole
Sun CR-18 700C 622 Road Rim Silver
$34.95
Sun CR-18 700C General Purpose Touring Rim. Satin Silver finish. Available in 32 or 36 hole. Non-machined sidewalls. Drilled for presta valve. Outer Width: 22.5 mm Internal Rim Width: 18 mm
Sun Rhyno Lite 700C 622 Touring Rim Silver
$39.95
Sun Rhyno Lite 700C Heavy-Duty Touring Rim. Satin Silver. Non-machined sidewalls. Drillings: 32 hole OUT OF STOCK. 36 hole Presta valve hole Outer width: 27.5mm Inside width: 22.0mm
Sun Rhyno Lite HD 559 26
$39.95
A great rim for heavy-duty applications. Silver. 32 and 36 Hole. Schrader valve.
Sugino 110mm BCD Chainring No Ramps Silver
$52.95 - $64.95
110mm BCD for full size MTB and Road Compact cranks. Compatible up to 9 speed systems. Silver Alloy** No Ramps or pins. Made in Japan. **Note: There is a running change on the finish on these rings. The new finish is a matte silver. We are still receiving product in both the new finish and the old polished silver finish. If you order multiple rings, we'll try our best to match the finishes, but can't guarantee it. Prices vary.
Sugino Double stack chainring bolt set (5)
$17.95
Chainring bolts for double chainrings, also work for the two larger rings of most triple cranks.
Sturmey-Archer Axle Key
$4.95
This is a commonly replaced part, the sliding key that the indicator spindle screws into. Click here for a parts diagram of the Sturmey-Archer AW hub.
Sturmey-Archer Axle Nut Left (plain)
$5.95
Unique thread size, nothing else fits. Shown with right axle nut for comparison Click here for a parts diagram of the Sturmey-Archer AW hub.
Sturmey-Archer Axle Nut Right (with chain guide) HMN129
$7.95
Unique thread size, nothing else fits. Shown with left (plain) nut for comparison Click here for a parts diagram of the Sturmey-Archer AW hub.
Sturmey-Archer Axle Washer 3.2 mm flat
$4.95
Axle spacing washer 3.2 mm (1/8 inch).
Sturmey-Archer Axle Washer w/7.9 mm tabs
$5.95
These essential washer incorporate serrations to keep the axle from slipping forward, and also features tabs that keep the axle from rotating in the frame due to pedaling torque. The HMW155 with 7.9 mm tabs fits the narrow axle slots of bikes originally intended for Sturmey-Archer hubs. If you're using a Sturmey-Archer hub on a newer frame made for a wider axle, you need the HMW494 with 9.5 mm tabs instead. Click here for a parts diagram of the Sturmey-Archer AW hub.
Sturmey-Archer Cable & Housing f/ 3-Speed Hub 1420mm
$15.95
Genuine Sturmey-Archer universal shifter cables. With black housing. These have long housing to run all the way down to the chainstay if your bike uses full housing. If your bike uses a pulley system, trim the housing to suit. Includes bolt-on "anchorage" to attach to the indicator spindle. Before you install cables, please check out our cable page Click here for a parts diagram of the Sturmey-Archer AW hub.
Sturmey-Archer Clutch (cross)
$7.95
This is a commonly replaced part. The 4 ends can get worn round where they drive the pinion pins in high gear, causing slippage. If this happens, you probably need new pinion pins too. Click here for a parts diagram of the Sturmey-Archer AW hub.
Sturmey-Archer Clutch Spring
$4.95
This is the coil spring that fits over the axle to make the hub shift to higher gears. The little cap that is sometimes found on one end of this spring is not needed. Click here for a parts diagram of the Sturmey-Archer AW hub.
Sturmey-Archer Cone Lock Washer (right side)
$4.95
This essential washer incorporates two tabs that secure the wench flats of the right side cone, so that it will stay in adjustment. The right cone adjustment is quite critical. With the left cone slack, the right one should be tightened finger tight, then backed off 1/2 turn, plus as much more as is needed to get the flats to line up with this washer's tabs. Click here for a parts diagram of the Sturmey-Archer AW hub.
Page 1 of 4 Next page