Skip to main content

Filter By:

New Items

 

Kenda 22 x 1 3/8 (490 - 501) Schrader Valve Inner Tube Thornproof
$10.95
Fits French juvenile and folding bikes, including Peugeot take-apart models. Standard scharader (car type) valve. Extra-thick, thornproof tube. Also fits some wheelchairs
Kenda K35 27 x 1-1/4
$16.95
Basic, good quality replacement tire. Black with gum sidewall 90 psi Wire bead.
Kenda Kourier Iron Cap 26 x 1 3/8 (590) Tire
$24.95
Special buy. Limited quantity High quality, high pressure tire. Max pressure 110 psi Casing: 60 tpi Iron Cap puncture resist belt This is the size used on most English 3-speed bicycles. Also used on some American made (Non-Schwinn) bikes by Huffy, Murray, Sears and others.
Sturmey-Archer Pulley Assembly Seat Tube 1
$10.95
Pulley Assembly Seat Tube 1" (fits old Schwinn, Huffy, Free Spirit 3 Spd bikes) For illustration, see our Sturmey-Archer Parts Page
Sun CR-18 590 mm (26 x 1 3/8) Rim 36H Satin Silver Finish
$39.95
Sun CR-18 Rim ISO 590 (26 x 1 3/8 E.A.3, 650A) Satin (flat) silver finish. Available in 36 hole drilling only. This excellent aluminum rim is a great upgrade for your older three-speed bike or for a smaller size road bike. This is, by far, the finest rim that has ever existed in this size. Stronger and lighter than the original steel rims, it will also make a considerable improvement in braking performance. 440 grams 22.5 mm width ERD 578
SunRace 13-28t Thread-on 7-speed Freewheel
$25.95
13-28 Teeth -Steel cogs with polymer spacers -Zinc finish -460 g It is generally good practice to replace the chain when you replace the freewheel. We recommend the SRAM PC-870 chain for use with this freewheel. This freewheel is compatible with all Shimano-type 7-speed drivetrains. This freewheel uses the Park FR-1 extractor. Are you sure you need a thread-on freewheel, not a cassette? Click here to find out which type your bike needs!
SunRace 13-34 Thread-on 7-speed Freewheel MegaDrive
$25.95
Model MF-M4S "Alpine" design, with closer spacing between most of the sprockets for efficient cruising, and the huge 34-tooth "bail-out" gear for the tough hills. This setup looks funny on paper, but works great in practice! It is generally good practice to replace the chain when you replace the freewheel. We recommend the SRAM PC-870 chain for use with this freewheel. (See related items below) This freewheel will index with any Shimano-type 7-speed shifter, but does require a wide-range (touring/mountain) rear derailleur. This freewheel uses the Park FR-1 extractor. (See related items) Are you sure you need a thread-on freewheel, not a cassette? Click here to find out which type your bike needs!
Sunlite 14-28 Thread-on 7-speed Freewheel
$15.95
SIS Compatible (Indexing) It is generally good practice to replace the chain when you replace the freewheel. We recommend the SRAM PC-870 chain for use with this freewheel. This freewheel is compatible with all Shimano-type 7-speed drivetrains. This freewheel uses the Park FR-1 extractor. Are you sure you need a thread-on freewheel, not a cassette? Click here to find out which type your bike needs!
Sunlite Alloy/Steel Handlebar Stem 22.2mm
$24.95
Great for converting old, non-American 10-speed bikes to upright handlebars. This stem will also fit Raleigh 3-speed bikes. Quill diameter: 22.2mm Forward Exension (reach): 3" Clamp fits ISO standard 1" (25.4 mm) handlebar center. Alloy top, steel quill.
Page 1 of 1