Lighting Small Parts
One of these plugs comes with each Shimano Nexus generator hub, but if you need extras, we have them. These also work well with Shutter Precision (SP) and Supernova dynamo hubs.
$12.00 - $13.00
Heavy duty coaxial wire for taillights. Coax is the most durable and attractive wire for this purpose. This is the same wire used as original wiring on Schmidt headlights. Available in two versions: The first photo shows the coax for Schmidt headlights. A circular ground connector and a 2.8mm female spade connector are installed on one end. This is the combination required for use with older Schmidt halogen Lumotec, Schmidt E6, Edelux/Edelux II headlights, which ground through the base. The lollipop ground connector gets installed on the mounting bolt at the base of the lamp. The power lead attaches to the connector in the base. Included are two loose 2.8mm female spade connectors for taillights. Many of the B&M taillights can be connected with bare wire, so they may not be necessary. The second photo shows the one for B&M headlights. It has two 2.8mm female spade connectors installed at one end. Also included are two loose 2.8mm female spade connectors for taillights if needed. 3mm O.D. x 190cm long.
$20.00 - $36.00
At last! Littleford Dyna-Snap magnetic connectors are the answer to dynamo connectors that are difficult or awkward to manage. They absolutely simplify the process of connecting your hubs to your lights. Removing the front wheel to change a flat or put the bike in the car or on a roof rack can be a real pain. Welcome, Dyna-Snaps!! They pull apart with almost no effort and reconnect instantly with a self-guiding magnetic force. Do them with your eyes closed? Do them while wearing gloves? Or mittens? NO PROBLEM! Do them at night? In the rain? NO PROBLEM! You can even impress your riding buddies by doing them behind your back! NO PROBLEM! Dyna-snaps are available in single wire (for lights grounded through the frame) and double wire sets. There is also a single-wire reversed polarity set for tail light wiring - you will need two if you run a ground wire. They are so smart and simple it seems incredible that they haven't been available before!
Double strand wire for B&M Taillights with two 3mm female spade connectors on one end.
Page 1 of 1