Filter By:

Lighting Small Parts

Littleford Dyna-Snap Connector
$20.00 - $33.00
At last! Littleford Dyna-Snap magnetic connectors are the answer to dynamo connectors that are difficult or awkward to manage. They absolutely simplify the process of connecting your hubs to your lights. Removing the front wheel to change a flat or put the bike in the car or on a roof rack can be a real pain. Welcome, Dyna-Snaps!! They pull apart with almost no effort and reconnect instantly with a self-guiding magnetic force. Do them with your eyes closed? Do them while wearing gloves? Or mittens? NO PROBLEM! Do them at night? In the rain? NO PROBLEM! You can even impress your riding buddies by doing them behind your back! NO PROBLEM! Dyna-snaps are available in single wire (for lights grounded through the frame) and double wire sets. There is also a single-wire reversed polarity set for tail light wiring - you will need two if you run a ground wire. They are so smart and simple it seems incredible that they haven't been available before!
Sinewave Cycles Reactor Dynamo USB Charger RED
$169.95 $220.00 23% Savings
Introducing the Sinewave Reactor! The performance of the Revolution dynamo-powered USB charger has been shrunk it into a package that fits above the star nut in a threadless steerer tube, with a pass through for the 6mm bolt. The only visible part is a custom CNC-milled stem cap holding the USB connector. The cap is only 10.6mm tall. The Reactor is compatible with 1" and 1 1/8" threadless systems. Uses: Bicycle touring Commuting Green/Portable Electricity for USB Powered Devices Power USB Battery Chargers or External USB Power Packs Emergency Power Source Navigation while riding Music while riding Features: Best in class efficiency High Speed Overload Protection Fits 1" or 1 1/8" threadless steerers Light weight Waterproof Specifications: Starts charging at 3.5 MPH (5.5 km/h) Full charging at 9 MPH (14.4km/h) Warranty: 1 year on defects in materials and workmanship.
Littleford Dyna-Snap Connector 3 Pack
$49.00
In order to guarantee connector compatibility for gadget swaps (plug in either a headlight or a charger/gadget) and alternate wire routing (ie: a headlight connected with or without a wired front rack), the Dyna-Snap is now available in cross-compatible three packs. At last! Littleford Dyna-Snap magnetic connectors are the answer to dynamo connectors that are difficult or awkward to manage. They absolutely simplify the process of connecting your hubs to your lights. Removing the front wheel to change a flat or put the bike in the car or on a roof rack can be a real pain. Welcome, Dyna-Snaps!! They pull apart with almost no effort and reconnect instantly with a self-guiding magnetic force. Do them with your eyes closed? Do them while wearing gloves? Or mittens? NO PROBLEM! Do them at night? In the rain? NO PROBLEM! You can even impress your riding buddies by doing them behind your back! NO PROBLEM!
Busch & Müller Lumotec 3 W Replacement Bulb
$5.25
These bulbs should have long lives. But it doesn't hurt to have a spare, especially if your light goes out on a long dark stretch of highway. The bulb is rated at 6 Volts and 3 Watts.
Busch & Müller Lumotec 2.4 W Replacement Bulb
$4.25
For use in headlight that are paired with a taillight. These bulbs should have long lives. But it doesn't hurt to have a spare, especially if your light goes out on a long dark stretch of highway. The bulb is rated at 6 Volts and 2.4 Watts.
Sinewave Cycles Revolution Dynamo USB Charger
$120.00
1 to 3 Day Lead Time The Sinewave Cycles Revolution is a state-of-the-art dynamo powered USB charger. With it, you can charge your GPS device, iPhone, lap top, smart phone, tablet, backup battery lights, external battery pack or virtually any other USB device while riding. Uses: Bicycle touring Commuting Green/Portable Electricity for USB Powered Devices Power USB Battery Chargers or External USB Power Packs Emergency Power Source Navigation while riding Music while riding Features: Best in class efficiency High Speed Overload Protection Simple Installation Light weight Waterproof Specifications: Starts charging at 3.5 MPH (5.5 km/h) Full charging at 9 MPH (14.4km/h) Weight: 37 grams Dimensions: 14x35x54 mm Wire length: 36" (91 cm) (contact us if your setup requires a longer wire) Wire ends: Stripped wire Warranty: 1 year on defects in materials and workmanship.
Sinewave Cycles Reactor Dynamo USB Charger
$220.00
Introducing the Sinewave Reactor! The performance of the Revolution dynamo-powered USB charger has been shrunk it into a package that fits above the star nut in a threadless steerer tube, with a pass through for the 6mm bolt. The only visible part is a custom CNC-milled stem cap holding the USB connector. The cap is only 10.6mm tall. Silver, black and red anodized finishes available. The Reactor is compatible with 1" and 1 1/8" threadless systems. Uses: Bicycle touring Commuting Green/Portable Electricity for USB Powered Devices Power USB Battery Chargers or External USB Power Packs Emergency Power Source Navigation while riding Music while riding Features: Best in class efficiency High Speed Overload Protection Fits 1" or 1 1/8" threadless steerers Light weight Waterproof Specifications: Starts charging at 3.5 MPH (5.5 km/h) Full charging at 9 MPH (14.4km/h) Warranty: 1 year on defects in materials and workmanship.
Shimano Connector Plug for Nexus Generator (Dynamo)
$3.95
One of these plugs comes with each Shimano Nexus generator hub, but if you need extras, we have them. These also work well with Shutter Precision (SP) and Supernova dynamo hubs.
Schmidt Coaxial taillight wire 190cm
$12.00
Heavy duty coaxial wire for taillights. Coax is the most durable and attractive wire for this purpose. This is the same wire used as original wiring on Schmidt headlights. Available in two versions: The first photo shows the coax for Schmidt headlights. A circular ground connector and a 2.8mm female spade connector are installed on one end. This is the combination required for use with older Schmidt halogen Lumotec, Schmidt E6, Edelux/Edelux II headlights, which ground through the base. The lollipop ground connector gets installed on the mounting bolt at the base of the lamp. The power lead attaches to the connector in the base. Included are two loose 2.8mm female spade connectors for taillights. Many of the B&M taillights can be connected with bare wire, so they may not be necessary. The second photo shows the one for B&M headlights. It has two 2.8mm female spade connectors installed at one end. Also included are two loose 2.8mm female spade connectors for taillights if needed. 3mm O.D. x 190cm long.
Busch & Müller B&M Double taillight wire
$4.00
Double strand wire for B&M Taillights with two 3mm female spade connectors on one end.
Busch & Müller Plug Adaptor for IXON Charger
$3.95
This adaptor converts the round-pin German plug to fit U.S./Canada flat pin wall sockets.
Page 1 of 1