This is a great mount for attaching a light to a braze-on on a front rack. Left or right side. Chromed steel. Made in the USA.
The Thorn cantilever mount eliminates the potential breakage problem that is particular to cantilever mounts. If your front brake yoke is high enough to clear the hole in the fork crown, this mount is unbeatable (and virtually unbreakable). Good stuff. See related items below if you need to lengthen your yoke cable.
Allows the use of lights with standard 10mm mount tabs (Supernova, B&M, Schmidt, etc) lights on 22.2 - 26.0 handlebars. Concave washers provide capability for horizontal (left/right) as well as vertical (up/down) adjustment.
Can be used to mount lights to any M5 threaded eyelet, rack mount or braze-on. - AL6061 alloy construction - 26mm diameter; 46mm length - M5 hex bolt included
$5.00 - $5.50
The B&M CYO mount is great for mounting most lights at the fork crown with caliper, disc, or cantilever brakes. It keeps the light on the centerline of the bike, which is the ideal location. It is the same mount supplied with many of the B&M lights, and can also be used with the Schmidt eDelux and SUpernova lights.
One of these comes with the light, but this is good for your other bicycle... Fits 22.2 to 31.8mm bars.
Light bracket designed for bikes with V-brakes (Linear Pull). Length: 75mm Steep Angle Works with: Lumotec Round Lumotec Oval Lumotec Lyt Lumotec IQ Cyo
Fits any rack-mount taillight with 50mm or 80mm spaced bolts.
If your rack has no hole in the rear but does have either a top plate or some cross braces, this T bracket can be clamped to the top of your rack and then the taillight can be bolted to it. The fore/aft length is 155mm. Fits any rack-mount taillight with 50mm or 80mm spaced bolts.
Page 1 of 1