Dynamo diode rear light with LineTec technology. Sleek, slim design, suitable for rear racks with 50mm bolt width. Overall width: 92mm B&M's LineTec technology creates a linear strip of light that is much wider than the actual taillight. 4 minute standlight with override. Wiring is not packaged with this light. Either LT203 or LT204 noted below will work.
The new Edelux II "raises the bar" for dynamo headlights. The beam is wider, more even, and no longer is there a dark near field area (directly in front of the bike). The beam is asymmetric (like an automotive low beam) and concentrates the light on the road where it is needed most. Glare for oncoming riders and drivers is reduced. For added safety, a stand light glows for several minutes when the rider stops. The Edelux II has a three position switch (on/senso/off). In senso mode it will automatically come on in low light (like a tunnel or deep shadows) for safety. The glass lens has a non-glare coating for maximum efficiency and durability. The housing is completely sealed against moisture. Comes with necessary wiring for headlight only. Taillight wiring not included. See Related Items. Features include: -90 lux output - SUPER BRIGHT! -Standlight -On/Off and Senso mode (3 position switch) -Can be used with, or without, a tail light. -Aluminium casing and copper heat sink for efficient dissipation of heat from the LED. -Available in black anodized, silver anodized, polished aluminium, or red anodized. -Weight: 85g.
$104.00 - $140.00
IQ2 lens, 80Lux. Powered by four AA batteries (either NiMH rechargeable or alkaline). Available with mount only or with charger and NiMH batteries. Glare protector included with both options. Includes universal 21mm to 31.8mm handlebar mount. Euro to USA plug adaptor sold separately. See related items.
Light bracket designed for bikes with V-brakes (Linear Pull). Length: 75mm Steep Angle Works with: Lumotec Round Lumotec Oval Lumotec Lyt Lumotec IQ Cyo
This is the brightest dynamo powered bicycle headlight at 100 lux. The new optical system produces a smoother distribution of light on the road than any other headlight. The housing is anodized aluminum and acts as the heat sink for the LED. Available in either silver anodized or black anodized finish. The IQ-X has a standlight, as well as daytime running lights. Automatic switching between daytime and nighttime modes. The Senso/Off pushbutton switch is at the back of the IQ-X, surrounded by a glowing blue ring. The IQ-X always provides the ideal headlight beam; straight ahead in daylight so that oncoming car drivers are alerted to your presence, changing over at dusk to a beam optimized for illuminating the road surface ahead, but still providing high visibility to oncoming drivers. The IQ-X ships with its own highly adjustable mount, and is compatible with other Busch & Müller headlight mounts. For most applications the included mount will work. For bikes with limited clearance under the bottom headset cup or with cantilever brakes, use either the CYO or Thorn mount listed below. The IQ-X is reversible and can be used in "upright" or "upside-down"(i.e. hanging from the mounting point, as it might be on a front rack) orientation. NOTE: Busch & Müller dynamo headlights are made to be powered by a 6 volt, 3 watt hub or sidewall dynamo. The use of Busch & Müller dynamo headlights powered by Velogical brand dynamos or other experimental generators risks damage to the headlight's electronics. Damage caused by overload through such generators is not covered by the 2 year Busch & Müller guarantee!
New for 2018. The IQ-XS has similar styling to the IQ-X with a machined and anodized aluminum housing. Available in either black or silver anodized finishes. It has daytime running light, and automatically switches between daytime and nighttime modes. 70 lux. The IQ-XS ships with its own highly adjustable mount, and is compatible with other Busch & Müller headlight mounts. For most applications the included mount will work. For bikes with limited clearance under the bottom headset cup or with cantilever brakes, use either the CYO or Thorn mount listed below. The IQ-XS is NOT reversible and cannot be used in "upside-down"(i.e. hanging from the mounting point, as it might be on a front rack) orientation.
Previous page Page 2 of 2