Filter By:

  • Show More Brands
  • Show Fewer Brands

Lighting

Velo Orange Rack light mount
$6.50
This is a great mount for attaching a light to a braze-on on a front rack. Left or right side. Chromed steel. Made in the USA.
Thorn Cantilever Light Mount
$36.00
The Thorn cantilever mount eliminates the potential breakage problem that is particular to cantilever mounts. If your front brake yoke is high enough to clear the hole in the fork crown, this mount is unbeatable (and virtually unbreakable). Good stuff. See related items below if you need to lengthen your yoke cable.
Planet Bike SuperFlash LED Red Tail Light for Bicycles
$24.95
Half-watt Blaze ® LED plus 2 eXtreme ® LEDs for visibility up to 1 mile -Unique, eye-catching flash pattern -Flashing and steady mode -Ultra compact vertical design is weatherproof, lightweight and durable -Includes bike mounts and clip mount for multiple mounting options -Up to 100 hours of run time on 2 AAA batteries (included)
Planet Bike SuperFlash LED Red Tail Light USB Rechargeable
$33.95
One of our favorite tail lights - Now in a USB version! The ultra-compact case is weatherproof, light and durable, and features a soft-touch power switch. - Includes bike mounts and clip mount for multiple mounting options as well as USB charging cable -USB rechargeable lithium ion battery for 36 hours of runtime from a 2-4 hour charge -Low battery flash pattern indicates the remaining 20 minutes of battery life -Unique, eye-catching flash pattern -Flashing and steady mode
Busch & Müller DTopLight XS Permanent Tail light
$32.00
This B+M battery powered tail light bolts a 50mm or 80mm bolt pattern rack mount. Two extremely bright LEDs shine to both sides and backwards, giving a 220 degree angle of visibility. It has a large reflector and burns steady only - as required by German law where it is manufactured. It does not have a blinky mode. The DToplight XS Permanent is an excellent tail light for the BROMPTON. It mounts on the existing reflector mount or rear rack and is protected when the bike is folded. It requires two AA batteries (not included). Overall width: 115mm
Busch & Müller Secula Plus Tail Light for fender mounting
$30.50
The Secula Plus for fender mounting is compatible with all Busch + Müller and Schmidt headlights. It does not ground to the mount like the Seculite Plus, which makes it an ideal tail light to use with the the Luxos U head light. It has a "standlight" which keeps the LEDs lit for several minutes after you stop. The Secula Plus lights use B+M's "Linetec" technology in the lens for a very bright and broad light with a large reflector. It should be mounted with the reflector in a vertical position to be most effective. This means that full coverage fenders are required in order to get enough length in the rear for proper mounting. Secula Plus lights will work with any B+M or Schmidt LED headlight. They use .6 Watts, requiring the Lumotec headlight to use a 2.4 Watt bulb if paired with a halogen headlight. Two strand wiring for the tail light is included.
Busch & Müller Lumotec HL Classic T Senso Plus headlight with Daytime Running Lights
$67.00
The Lumotec Classic T Senso Plus is styled much like the dynamo headlights of the 1950s. But the internals are all modern, using the LED, optical system and electronics of the Lumotec Lyt headlights. The LED remains lit, at a lower intensity for several minutes after you stop, say at a traffic light. The Daytime Running Lights (aka Licht 24) on this model run when the ambient light level is high. This added safety feature enhances visibility during the day.
Busch & Müller Secula Plus Tail Light for seat post or chain stay
$34.50
Until recently, no one made a dynamo powered tail light for seat post or seat stay mounting that was compatible with Busch + Müller or Schmidt head lights. The Secula Plus for seat stay or seat post mounting solves that problem. It has a "standlight" which keeps the LEDs lit for several minutes after you stop. The Secula Plus lights use B+M's "Linetec" technology in the lens for a very bright and broad light with a large reflector. Secula Plus lights will work with any B+M or Schmidt LED headlight. They use .6 Watts, requiring the Lumotec headlight to use a 2.4 Watt bulb if paired with a halogen headlight. Two strand wiring with connectors to the headlight is included.
Busch & Müller Seculite Plus Taillight
$33.00
The Seculite Plus is designed to be mounted to a fender. It can also be mounted on a cantilever post with the cross bracket (see related items below). It's a bright LED tail light that is designed to work with any generator powered headlight. It has a "Standlight" which keeps the LEDs lit for several minutes after you stop. It will work with any LED headlight. The Seculite Plus uses .6 Watts, requiring the Lumotec headlight to use a 2.4 Watt bulb if paired with a halogen headlight. Since this taillight can ground to the frame via it's mounting bolt, we don't recommend it for use with the Luxos U headlight. Two strand wiring with connectors to the headlight is included.
Busch & Müller Lumotec 3 W Replacement Bulb
$5.25
These bulbs should have long lives. But it doesn't hurt to have a spare, especially if your light goes out on a long dark stretch of highway. The bulb is rated at 6 Volts and 3 Watts.
Busch & Müller CYO Fork Crown Mount
$5.00 - $5.50
The B&M CYO mount is great for mounting most lights at the fork crown with caliper, disc, or cantilever brakes. It keeps the light on the centerline of the bike, which is the ideal location. It is the same mount supplied with many of the B&M lights, and can also be used with the Schmidt eDelux and SUpernova lights.
Busch & Müller Eyc LED Headlight
$75.00 - $83.00
The impressive new Eyc (rhymes with "bike", of course) headlights from Busch+Müller are super compact, light, and affordable. They use the new Lumotec "IQ2" reflector technology to throw a beam that is similar to the original Schmidt eDelux light (which was state of the art for lighting just a year or so ago) at less than half the price. The asymmetrical beam puts the light on the road where it is needed, and not in the eyes on oncoming riders, pedestrians, or motorists. The Eyc is plenty bright for spirited riding on dark roads. Two models are available: - The Eyc N Plus has a simple on/off switch and a stand light that shines when you stop (like at a stop light). It glows for several minutes and is a significant safety feature. - The Eyc T Senso Plus is the more expensive model which has an on/off switch with an incorporated light level sensor and daytime running lights. When it is "on" in bright light, LED's glow to make you more visible (think "be seen" lights). When the light level is low, the main LED automatically comes on for greater illumination for navigating ("to see" lighting).
Busch & Müller Toplight Line Battery Powered Tail Lights
$45.00 - $53.00
The Toplight Line Permanent & Senso are rack mounted tail lights that incorporate Busch + Müller's LineTec technology. The light from two LED's is dispersed by a fresnel lens to make a very wide, bright tail light. Burn time is 38 hours on a single AA battery (not included). There are two versions: - The "Permanent" model has a simple On/Off switch. - The "Senso" model has a 3 position switch, On/Off/Senso. When you switch it to Senso mode, the light switches on for about 4 minutes, and then, if it's dark and if the light senses movement, the light will stay on. When your bike stops moving, the light will remain on for about 4 minutes and then automatically switch off. This gives you light while stopped at an intersection. As you ride in daylight, the light will switch off, and only come on at twilight and only if the bike is moving. Each of the Toplight Line lights has a large bright reflector, as well. As with ALL German made tail lights, this light burns in steady mode only. It is not a "blinky".
R & M R&M Handlebar Mount
$23.00
Allows the use of lights with standard 10mm mount tabs (Supernova, B&M, Schmidt, etc) lights on 22.2 - 26.0 handlebars. Concave washers provide capability for horizontal (left/right) as well as vertical (up/down) adjustment.
Busch & Müller Lumotec Caliper mount bracket
$4.50
A new, heavier duty bracket for mounting a round Lumotec light at the fork crown with caliper brakes.
Supernova New Handlebar Mount
$24.00
This mount adapts the Supernova E3 Pro 2 for handle bar mounting. It will also work on any light with a standard 10mm wide x 6mm bracket like the the Schmidt eDelux or lights from Busch & Müller. Two O-rings with different elasticity are included for use on bars or stems of 25.4mm-31.8mm.
Busch & Müller  Secula Permanent Fender Mount Taillight battery powered
$30.00
Includes 2 AAA batteries. The Secula lights use B+M's "Linetec" technology in the lens for a very bright and broad light with a large reflector. It should be mounted with the reflector in a vertical position to be most effective. This means that full coverage fenders are required in order to get enough length in the rear for proper mounting.
Busch & Müller Toplite Line Plus Rack Mount Generator Taillight
$40.50
Dynamo diode rear light with LineTec technology. Sleek, slim design, suitable for rear racks with 50mm bolt width. Overall width: 92mm B&M's LineTec technology creates a linear strip of light that is much wider than the actual taillight. 4 minute standlight with override. Wiring is not packaged with this light. Either LT203 or LT204 noted below will work.
Busch & Müller Lumotec IQ CYO Premium T Senso Plus
$113.00
New for 2013, Busch + Müller has a new CYO Premium series with a brighter and broader beam than the previous models. In addition to upgraded optics, the new light has an improved 2-positon Off/Senso switch. When off, it's off. In Senso mode during daylight, the LED running lights are on. In Senso mode at night, the daytime LED's dim and the main light illuminates the road. Near field illumination is much improved over the previous model as well. A 70cm wire for the dynamo connection and is hard-wired to the light. Pig-tail connectors and wiring for an optional tail light are also included.
  • 80 lux output
  • Includes fork crown mount bracket and wire cover
  • Lens has built-in reflector
  • If you need 4.8mm female spade connectors for a Schmidt hub we will include them at no charge. Mention it at checkout.

    Busch & Müller Luxos IQ2 U Headlight w/ USB Charger
    $226.00
    New for 2013, the Luxos headlights have a new optical system, IQ2, which provides an even wider beam than the IQ system, and it's brighter too, at 70 or 90 lux. Luxos lights also have B+M's "Licht 24" system of daytime running lights. The Luxos U is the "deluxe" version. It has innovative new technology that senses rider speed and adjusts light output accordingly, always providing an optimal beam pattern for a given speed. No other light available that is this "intelligent". The Luxos U incorporates a handlebar mounted switch incorporating a USB outlet for charging USB devices. It also has a cache battery for those devices that might switch off if the dynamo's voltage drops, like when standing at a stop light. Luxos U Features:
  • 70 or 90 Lux (brightness of the beam at a standard distance)
  • Handlebar mounted switch with USB charge port
  • Licht 24 - Daytime Running Lights
  • Automatic Sensor Switching
  • Standlight
  • Cable Conduit for mount
  • Torx T20 fixing bolt for mount (includes T20 wrench) Wiring for the headlight to the hub is included. Tail light wiring is not. See related items below.
  • Schmidt Handlebar mount
    $43.00
    Will securely and attractively support head lights from Busch & Müller, Schmidt, Supernova, and others on bars with a diameter from 22 to 31.8mm. Available in polished silver and black. So, what's not to like?
    Origin8 Light Mount - Eyelet Stub Silver
    $10.95
    Can be used to mount lights to any M5 threaded eyelet, rack mount or braze-on. - AL6061 alloy construction - 26mm diameter; 46mm length - M5 hex bolt included
    Busch & Müller IXON Glare protector
    $7.50
    The B&M Glare protector eliminates the possibility of bothersome glared in the rider's eyes, especially when climbing out of the saddle. It attaches to the top of the light with two adhesive patches.
    Busch & Müller Lumotec 2.4 W Replacement Bulb
    $4.25
    For use in headlight that are paired with a taillight. These bulbs should have long lives. But it doesn't hurt to have a spare, especially if your light goes out on a long dark stretch of highway. The bulb is rated at 6 Volts and 2.4 Watts.
    Busch & Müller Lumotec 471H Headlight Mounting Bracket f/V-Brakes
    $1.95
    Light bracket designed for bikes with V-brakes (Linear Pull). Length: 75mm Steep Angle Works with: Lumotec Round Lumotec Oval Lumotec Lyt Lumotec IQ Cyo
    Supernova Multimount
    $22.50
    The Supernova Multimount can be used to fork mount any light with a standard 10mm wide bracket. It is not weakened over time by road vibration and will support any light without fear of failure. You can adjust the angle of the mount arm to allow for clearance with different length straddle cables. The finish is black. This is the CS version, which is designed for fork crowns drilled in both the front and the rear.
    Busch & Müller Toplight Line Plus Brake Plus w/Pulse. Rack Mount Generator Taillight
    $59.00
    This new version of the BrakeTec pulsates when the brakes are applied! The Toplight Line Brake Plus senses when the bike slows under braking and glows brighter, just like the brake lights on an automobile. And it has all of the other features of the Toplight Line Plus taillight; 50mm bolt spacing, button to stop the standlight, etc. Wiring is not packaged with this light. Either LT203 or LT204 noted below will work.
    Schmidt SON Tail Light - rack or seat post mount
    $73.00 - $92.00
    SON dynamo powered rack-mount tail lights are new for 2014. These little gems are compact and super bright. Two housing colors (black or silver) and two lens colors (red or clear) are available. All models have a red LED and shine RED. Clear lenses are just a tad brighter than red lenses. The difference is primarily cosmetic. Both rack mount and seat post mount types are available. They are compatible with all 6v dynamo powered headlights made by Schmidt, B&M, Spanninga, and others. This includes the Luxos U. They are NOT compatible with Supernova head lights. They can be powered by any 6v/3w Dynamo, hub or sidewall/bottle. All necessary wiring, connectors, and mounting hardware is included for installation on standard mounts with holes 50mm on center. See related items below for adapters if needed. No reflector is incorporated with the light.
    Busch & Müller IXON Core IQ2 headlight
    $86.00
    The IXON Core headlight uses Busch + Müller's IQ2-TEC reflector technology to throw an asymmetrical beam that is brighter, broader and smoother than the previous IXON models. Unlike so many other bike lights that are merely flashlights with mounting brackets, the beam of the IXON Core is shaped like an automotive low beam, so there's no glare in the eyes of oncoming traffic or pedestrians. ALL of the light is focused on the road, where it belongs. USB Micro charge cord included.
  • Handlebar mount included.
  • IXON Core Head Light weighs only 112g.
  • 50 lux full power runs 3 hours.
  • 12 lux low power runs 15 hours.
  • Busch & Müller TopLight Flat Plus S LED Taillight - generator powered
    $19.50
    The Toplight Flat S Plus incorporates B&M's LineTec technology that brightens and broadens the light's effect by the use of prisms in the lens. The Toplight Flat S Plus can be wired into the system via connectors on the bottom of the Lumotec headlights. Other headlights will require splicing the wires. The Toplight Flat Plus bolts to the horizontal backend section of a rear rack. It's a bright LED tail light that is designed to work together with the Lumotec headlights. It has a "Standlight" which keeps the LEDs lit for several minutes after you stop. Visible from 220 degree angle. It is compatible with all B&M and Schmidt LED headlights. If used with a halogen headlight, the headlight bulb must be 2.4w. Tail light wiring is not supplied. See related items for wire options.
    Page 1 of 2 Next page