Light & Motion's Vis 180 Taillight offers both visibility and convenience with its unique design. It combines high-power LEDs, custom reflectors and a rechargeable lithium battery for total convenience and unmatched visibility on the road and trail. Featuring: • 70 Lumen output certified to the FL-1 Standard. • Engineered with the highest-level CREE LED and enhanced firmware. • Dual LED array to maximize visibility. • Ultralight aluminum body. • Accurate battery charge and status indicator with 4 status levels. • Custom engineered reflectors and optical solutions optimize the light to distribute red and amber light a full 180 degrees. • Secondary LED spreads amber light for 180 degrees of visibility. • Simple ratchet in/out adjustability. • Slide lock system allows you to easily take on/off without tools. • Integrated clip for attaching to backpack or messenger bag. • Bike rack mount available and sold separately. • MicroUSB Rechargeable (fully charges in 5 hours). • Low battery warning and auto shut-off to prevent damage. • Multiple power settings. Run time/Lumens • HiPulse: 6:00/70 • LoPulse: 12:00/35 • Solid: 4:00/75 • Paceline: 32:00/5
Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)
Stand out at night! The Blinky 3H combines 3 bright LEDs with a parabolic reflector for up to a mile of visibility. And, its self-leveling helmet mount ensures optimum visibility as you ride. It also includes seatpost and seatstay mounts. The Blinky 3H has steady and flashing modes and runs for up to 100 hours on the included AAA battery. Also, this light includes a reflective lens and side reflective strips for extra safety.
Topeak's RedLite Aura gives you 1 high-flux piranha LED and 2 super-bright red LEDs to provide superb visibility for cars approaching from the rear. It mounts quickly and easily to Topeak racks and seatposts, and the included coin batteries deliver up to 120 hours of run time.
Topeak's RedLite II mounts on seatposts, seat bags and seatstays. Its 4 super-bright LEDs shine through a 220-degree, wide-angle, reflective lens to alert traffic approaching from almost anywhere. The RedLite's watch-style lithium batteries (included) offer up to 100 hours of run time. Plus, you can choose from constant or blinking mode.
Topeak's RedLite Race gives you 2 super-bright red LEDs providing excellent visibility. A rubber strap lets you mount it quickly and easily to just about any seatpost or seatstay. The included coin batteries deliver up to 140 hours of run time. Simply push the lens to turn the light on and off!
Stay visible out on the roads and paths with Sunlite's TL-L160 Taillight on your bike. It sports an ultra bright 1/2 watt LED, steady and flashing modes, and 100 hours of run time! A no-tools-required quick-release seatpost mount is included, too.
Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.
Sunlite's 330 Taillight helps you be seen. It sports a 100 hour run time with a 1/2 watt 3 LED system. The housing is water resistant and it has steady and flashing modes.
Be seen with Sunlite's TL-L350 Taillight. This powerful little light uses 3 bright LEDs for serious visibility. It has steady and flash modes and runs for a long time on the included 2 AAA batteries. The light is housed in a water-resistant body and the quick-release mount attaches to any seatpost.
If you ride at night, you need to equip yourself with Sunlite's 510 Taillight. This powerful little light helps keep you visible out there with 5 super-bright LEDs. You've got flash and steady modes, and the 510 can be mounted to your post or clipped to your belt.
- 6 lumen LED safety light - Built-in Li-Ion USB rechargeable battery - 2.5 ~ 10 hour run time per charge - Charging and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit rubber strap - Water resistant
- USB rechargeable 3 lumen safety light - 4 modes including 1 solid and 3 flashing settings - Multi-fit rubber strap attachment - Charging cable included
- 8 lumen, single LED safety light - 2 modes - solid and flashing - Up to 110 hour run time with 2 CR2032 batteries (included) - Multi-fit rubber strap attachment
- 24 lumen LED - Built-in Li-Ion USB rechargeable battery - 1.5 ~ 6 hour run time per charge - Low battery, charging, and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit rubber strap - Water resistant
• Super bright LED & parabolic reflector • Visibility up to 1200 Feet • Universal arm, leg or bar fit • Weather proof design • Soft touch switch • Red reflective tape
• 2 x 0.5 watt super bright LEDs • 3 modes (1 steady 2 flashing) • Multi-fit QR seat post mount • Includes 2 AAA Batteries • Water resistant
• 2 x 0.5 watt super bright red LEDs • Built-in Li-Ion rechargeable battery • 2 mode (steady / flashing) • 2 to 4.5 hour run time • Includes USB charging cable • Multi-fit QR seat post mount • Water resistant
- 2 x 0.5 watt super bright red LEDs - 3 modes (1 steady 2 flashing) - Multifit bracket (25-32mm)
- 5 super bright LEDs - Built-in Li-Ion rechargeable batteries with USB cable - 2.5 ~ 5 hours run time per charge - 3 modes (2 Steady, 1 Flashing) - Multi-fit silicone strap - Water-resistant silicone body - Rechargable: USB
Signalling turns in a way that drivers are familiar with means they'll be more likely to see you. Day or night, Sunlite's Turn Signal & Tail Light combo increases your visibility to other road users. This handy device is controlled by a thumb switch that mounts to your handlebar for the ultimate in convenience and safety.
Sigma Rear Brake light. A simple little light with a big purpose — safety. Just clip this light on your rear brake cable and it will help alert anyone behind you that you are slowing down. Perfect for kids, commuters, and group rides! Fits U-brakes, V-brakes, canti's, road calipers, mechanical disc brakes, but won't fit hydraulics. Functions: - LED brake light with replaceable CR 1025 button cell battery (included) - Clearly visible, red brake LED during use - Burn time: approx. 200 hours continuous light, average of approx. 100,000 braking processes - Attaches to the rear brake cable using a 2.5 mm hex wrench (not included) - Quick and simple attachment - Attaches to cable actuated mechanical brakes (25 mm clearance) - Rounded brass screw to protect the brake cable - Five different colors are available to match any bike. - Robust, water-resistant housing - Weight: 7 g
Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)
Portland Design Works' Gravity Tail Light has a built-in accelerometer that detects deceleration or swerving and automatically changes to a super bright, solid beam to warn following traffic. To allow the accelerometer to calibrate, always install the Gravity on your bike before powering it on. Hold the power button down for 1 second to turn the light on or off. Then, keep your bike still for 1 second after pressing the power button to complete the calibration. The Gravity Tail Light has a redesigned mount that works with the included seatpost and seatstay brackets. - Automatic accelerometer brake light function shines 100 lumens bright - 2 Modes (runtime): Solid - 20 lumens (12 hours), Flash - 80 lumens (30 hours) - USB rechargeable li-polymer battery - Weatherproof exterior for all season riding - Includes brackets for seatpost and seatstay mounting - Mounts vertically or horizontally - Includes Micro USB recharging cord - Weight: 1.9 oz
Minimal and mighty! The Portland Design Works Meteoroid headlight mounts in seconds and shines super brightly with high-quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Powered by 2 x CR2032 batteries that offer up to 60 hours of runtime. Pairs nicely with the Meteoroid Head Light - also available as a light set. - 3 Modes - Lumen output (burn time): Flash - 3 lumens (60 hrs), Pulse - 7 lumens (20 hrs), Steady - 4 lumens (18 hrs) - UV Proof rubber mount - Double-click lens to turn on/off - 2 x CR2032 batteries included - Weatherproof exterior for all season riding - Weight: 30 g (1.04oz)
Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty
Portland Design Works' Red Planet Taillight will enhance your visibility after dark. It boasts five bright LEDs with three modes to notify others of your presence. And, the Red Planet includes mounts for a seatpost, seatstay, and backpack, so you can put it wherever you want. - Five red LEDs - Steady, blinking and dance modes - Stayputnik mount included - Runs on 2xAAA batteries (included) - Weatherproof exterior for all season riding - Weight: 45 g (1.6 oz)
The Amigo tail light will keep you visible on your next bicycle trip. It mounts in a snap and the durable alloy body and brilliant LED optics keep you safe. Just like your best friend, the Amigo always has your back! - High output surface mounted LED provides steady and flashing modes - FL1 Tested - Run times: 55 hrs (steady – 2 lm) and up to 100 hrs (flashing - 2 lm) - Provides 140° of visibility - Water resistance rated to IPX3 standard - 2 CR2032 battery (included) - Durable alloy housing - Rubber strap mounts, adjusts and removes without tools - 26 grams
28 LED PB Power Array rechargeable tail light The Shiner Back tail light has got your back! Its linear design integrates smoothly to your bike whether mounted to your seat post, seat stay, rack, helmet or fenders. The 28 LED PB Power Array will make sure you stand out in traffic whether it’s day or night. - PB 28 LED Power Array provides steady, Courtesy & Superflash mode - FL1 Tested - Run times: 2 hrs (steady – 23 lm), 3.5 hrs (Courtesy - 7-20 lm) and 11.5 hrs (Superflash - 23 lm) - Provide 180° of visibility - Dust & water resistance rated to IP64 standard - 370 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Smart Charging Technology with built in low battery indicator - Highly visible, even in daylight - Includes standard strap and the Shiner Helmet/Rack bike light bracket for seat post, seat stay, rear rack or helmet mounting - The Shiner Back can also mount to Cascadia ALX bike fenders with the Fender Bracket (#3087-1) which is sold separately - 30 grams
• 25 Lumen tail light • 6 modes (3 steady 3 flashing) • 1 ~ 5 hour runtime • Low battery, charging and fully charged indicator • Water resistant construction • USB charging cable • Rubber strap seatpost mount
Page 1 of 2 Next page